Page 1 of 1
vertigate shifter for 091
Posted: Thu Apr 20, 2006 2:04 pm
by kgturbo
Does anyone know of a manufacturer of a vertigate for an 091 or do they only make it for the berg conversion 113/002 front housing. I would like to take advantage of the bigger gears and stuff and the trans is going into a chassis car so I really don't have to use a conversion kit. Thanks
Posted: Fri Apr 21, 2006 6:31 am
by Muffler Mike
MSE should have a bus kit
I have seen a few at JCL race cars. I put one of these on a type 1 recently.
Basically it is just the nose cone assembly that is different.
latest and greatest JCL shifter on a type 1 box. the bus box would just have a little different shape.
And if i am not mistaken, the MSE versions leave the stock shift rails in and just hook into the area where the original hockey stick would grab.
Posted: Fri Apr 21, 2006 10:00 am
by akabuzz
Yes, you are not mistaken, thats how mine works.
Posted: Fri Apr 21, 2006 10:50 am
by Abell
That JCL shifter looks sweet!Does anyone have a link to their home page or where to buy one?
Posted: Fri Apr 21, 2006 11:08 am
by Muffler Mike
Abell wrote:That JCL shifter looks sweet!Does anyone have a link to their home page or where to buy one?
Only one place you can get those. direct through JCL. (714) 895-7782
No doubt a very nice piece. makes me want to try and fit one in my car too.
Posted: Fri Apr 21, 2006 11:18 am
by Abell
Muffler Mike wrote:Abell wrote:That JCL shifter looks sweet!Does anyone have a link to their home page or where to buy one?
Only one place you can get those. direct through JCL. (714) 895-7782
No doubt a very nice piece. makes me want to try and fit one in my car too.
Thanks for the responce Mike.Is calling the only option,or do they have a internet site so I can have a better look.
Posted: Fri Apr 21, 2006 11:27 am
by Muffler Mike
Abell wrote:Muffler Mike wrote:Abell wrote:That JCL shifter looks sweet!Does anyone have a link to their home page or where to buy one?
Only one place you can get those. direct through JCL. (714) 895-7782
No doubt a very nice piece. makes me want to try and fit one in my car too.
Thanks for the responce Mike.Is calling the only option,or do they have a internet site so I can have a better look.
calling is the only option. there is no web page up currently.
Veretigate shifter for 091
Posted: Fri Apr 21, 2006 3:03 pm
by kgturbo
Hey Mike, Thanks for the reply. I tried contacting Jimmy Larson yesterday and Today about a chromoly roll cage for my kg vert. This shifter is for my pro mod car. I've come to the conclusion that if I were to build a full tilt 091 with a vertigate that would be the best, short of using a Medeola(which would require me to modify chassis) subsequently i've only had to modify chassis minimally to accomadate the 091. I cut top of type 1 mount and welded type 2 mount on the forward side of old mount. Axles line up perfectly. Thanks
Veretigate shifter for 091
Posted: Fri Apr 21, 2006 3:03 pm
by kgturbo
Hey Mike, Thanks for the reply. I tried contacting Jimmy Larson yesterday and Today about a chromoly roll cage for my kg vert. This shifter is for my pro mod car. I've come to the conclusion that if I were to build a full tilt 091 with a vertigate that would be the best, short of using a Medeola(which would require me to modify chassis) subsequently i've only had to modify chassis minimally to accomadate the 091. I cut top of type 1 mount and welded type 2 mount on the forward side of old mount. Axles line up perfectly. Thanks