EFI newbie - need lots of help here

[Fasty]

Ok, so i have tried to read as much as possible, but i feel a bit stuck about this EFI-thing..

I`m building a supercharger on a Type 4, 2 liter. And i have to build this system with EFI.

So.., i know i need intake manifolds machined for injectors - but i need something like this: http://cbperformance.com/catalog.asp?ProductID=320 And i guess they are for T1 engines only.
Can i use stock intake manifolds from a T4 2 lier CU (mechanical injection) - will they fit "EFI" injectors too? Or is it possible to buy this somewhere?

I also need a throttlebody with TPS. I will find one on a junkyard..

But what else do i need? I know there are lots of sensors etc, and maybe other things. Would be great to start find the parts i need now.

But the most important is the intake manifolds, without them i cant finish the building of the supercharger setup.

[Guest]

If you have the stock 2.0 in take and runner's i can help you with this we do a upgrade tb 65mm to fit the plenum and you can use ford injectors 23lb with a after market efi set up .
We have done 914's 912e type1 and 911's . you can go with the jenvey tb's if you need to read up on how efi work and all the sensors and what they do check out www.emeraldperformance.com i hope we have all the info you need to set you on the right track
from bug man nrg