Page 1 of 1
Distributors
Posted: Fri Nov 19, 2004 11:34 am
by supavert
What's up everyone?
Can anyone tell which distributor is the best choise for a type 4 motor the 009, the mallory, or the msd? Thanks, Supavert, Peace!
Posted: Fri Nov 19, 2004 11:55 am
by tuna
That depends on your needs. If the budget is tight, stay with the stock distributor like the SVDA. If you are looking for increased performance, the distributor to beat is the Mallory Unilite.
Tuna
Posted: Fri Nov 19, 2004 11:56 am
by Greggyboy
Mallory. Do a search to find out why.
Posted: Fri Nov 19, 2004 5:57 pm
by Ephry73
Hey Charles, it's me Ephry here.... I would spend the extra bucks on a Unilite without the vaccum advance. it is worth every penny!
if you buy a 009 from any of the local suppliers you'll spend at least $65 bucks. $200 dollars extra will get you a much better distributor. I can help you set it up. It is expensive, but they show up on Ebay for abot a hundred bucks or so. grey/Grey springs give you a much faster rate and definitely make the dizzy work better. Even with a stock coamshaft the Unilite just makes the engien run smoother.
Peace!
Ephry