Page 1 of 1
911 adjusters
Posted: Wed Apr 18, 2001 3:09 pm
by kokanee
where can I get 'em?
are they worth it?
I have the big and small rockers
any special setup?
tia,
K
911 adjusters
Posted: Wed Apr 18, 2001 5:12 pm
by stevestromberg
I can supply a 3 sets out of my stash. Steve
911 adjusters
Posted: Wed Apr 18, 2001 5:15 pm
by Tom Notch
The Berg swivel foots work very well and are a lot less money. And again just the 8mm rockers. Take about .060 or so off the bottom of the rocker so the adjusting screw will travel up into the rocker a bit farther so as to off set the added length and it will be easier to set up your geometry. Even FAT will mention this little tidbit.
------------------
Tom Notch
Tom's Old VW Home
911 adjusters
Posted: Wed Apr 18, 2001 11:06 pm
by Bleyseng
I also run the Berg swivel feet with the 1.7 rockers. Also, swap out the springs on the rocker shafts for the solid spacers off a Hydro valve rocker set up. This keeps the rockers in place with no chance of them slipping around.
Geoff
------------------
76 914 2.0L
911 adjusters
Posted: Thu Apr 19, 2001 9:53 am
by Brandon Sinclair
I haven't purchased anything from Jim, but I saw on his Web page that he sells the 911 adjusters..
http://www.geocities.com/motorcity/9008/parts8.html
911 adjusters
Posted: Thu Apr 19, 2001 11:06 am
by Tom Notch
I didn't say FAT used Berg adjusters, I said they will tell you to trim the rocker if you use them. Just don't want any mis-understandings.
------------------
Tom Notch
Tom's Old VW Home