Jake, Have any stock 2.0 bus cooling tins laying around?

76campmobile · Post by **76campmobile** » Sat Feb 07, 2004 1:09 pm

Mine are a bit rusty, might replace instead of repair if price is right......

Looking for the top pieces that cover the cylinders/heads on each side. These are the pieces that are marked 1-2 and 3-4. Also maybe the top front piece that goes over the flywheel end. For a 76 bus.

Let me know, if so, your price?
.
Shipping to zip 12871 Upstate N.Y.

Trike Rider · Post by **Trike Rider** » Sat Feb 07, 2004 5:14 pm

I have a set in good shape.
Dennis

76campmobile · Post by **76campmobile** » Sat Feb 07, 2004 6:07 pm

Dennis, sent you a pm.....

MASSIVE TYPE IV · Post by **MASSIVE TYPE IV** » Sat Feb 07, 2004 6:57 pm

probably 50 sets atleast... Let me know if you want some/

76campmobile · Post by **76campmobile** » Sat Feb 07, 2004 7:05 pm

Any idea on price including shipping to N.Y.? Only need the 3 pcs mentioned , the rest are in good shape.
You can PM me....Thanks.

MASSIVE TYPE IV · Post by **MASSIVE TYPE IV** » Sat Feb 07, 2004 7:07 pm

I'll take 20 bucks per part and pay shipping..

76campmobile · Post by **76campmobile** » Sat Feb 07, 2004 7:18 pm

Sounds fair, I'll email you in the a.m. for your address.
Thanks Jake

MASSIVE TYPE IV · Post by **MASSIVE TYPE IV** » Sun Feb 08, 2004 12:31 pm

47 Raby Drive, Cleveland GA 30528

I'll send the tins when I receive the $ They need cleaning, but otherwise are in great shape. I have tons of tin from all the upright conversions we do.

Podunkjr · Post by **Podunkjr** » Sun Feb 08, 2004 9:58 pm

Jake, I could use 2 sets of 1.8L non-injection upper and lower tins that go over the cylinders if you have them. (doing the cali conversion the old fashioned way and cutting/rewelding stock tin) Email me with a price at [email protected] . Thanks!

Shoptalkforums.com

Jake, Have any stock 2.0 bus cooling tins laying around?

Jake, Have any stock 2.0 bus cooling tins laying around?

Me too!