Subaru stand alone harness ej20g (old 90’s engine)

Post Reply
maurice
Posts: 103
Joined: Sun Apr 03, 2016 12:49 pm

Subaru stand alone harness ej20g (old 90’s engine)

Post by maurice » Fri Jun 04, 2021 5:37 pm

I have a 1995 subaru ej20g compete (blown) engine for sale. Currently in my vw bug.

ej20g engine from a 95 wrx. It’s setup as a stand-alone using the stock ecu and a robtune 550 tune with injectors. I have some of the stock stuff the tune doesn’t use too (barometric pressure sensor and solenoid, boost controller, ecu, might have a couple other things). It also has forged 205 pistons.

I’ve also got ARP rod bolts that only have about 400 miles on them, and ARP head studs.

I’d need to pull the motor and disassemble, just looking to see if there was interest in it. The harness would make a great swap for a bug project

Post Reply