How will this rims fit my late fastback with little to no lowering, rubbing?
thanks,
danny
Lemmertz GT Sport rim 4'5" on late type 3
- Piledriver
- Moderator
- Posts: 22715
- Joined: Sat Feb 16, 2002 12:01 am
Re: Lemmertz GT Sport rim 4'5" on late type 3
Backspacing ideally needs to be in the ET25-35 range on 5.5s, but skinny helps.
A lot of T1 aftermarket rims are ET15 or so, may only work well with ~stock tires if then.
A lot of T1 aftermarket rims are ET15 or so, may only work well with ~stock tires if then.
Addendum to Newtons first law:
zero vehicles on jackstands, square gets a fresh 090 and 1911, cabby gets a blower.
EZ3.6 Vanagon after that.(mounted, needs everything finished) then Creamsicle.
zero vehicles on jackstands, square gets a fresh 090 and 1911, cabby gets a blower.
EZ3.6 Vanagon after that.(mounted, needs everything finished) then Creamsicle.
- aircooledtechguy
- Posts: 1709
- Joined: Sun Oct 28, 2001 1:01 am
Re: Lemmertz GT Sport rim 4'5" on late type 3
You will have no problem fitting those to your T3.
-
- Posts: 35
- Joined: Sat Jan 12, 2013 12:29 am
Re: Lemmertz GT Sport rim 4'5" on late type 3
Thanks Piledriver/aircooledtechguy, I'll have to find some pix on a late fb/sb to see if I like the look, befor I pick'em up:)
Danny
Danny
- Piledriver
- Moderator
- Posts: 22715
- Joined: Sat Feb 16, 2002 12:01 am
Re: Lemmertz GT Sport rim 4'5" on late type 3
Make sure they are not the Chinese-made Mid-america repops, they apparently weren't particularly round.
Or straight.
Or straight.
Addendum to Newtons first law:
zero vehicles on jackstands, square gets a fresh 090 and 1911, cabby gets a blower.
EZ3.6 Vanagon after that.(mounted, needs everything finished) then Creamsicle.
zero vehicles on jackstands, square gets a fresh 090 and 1911, cabby gets a blower.
EZ3.6 Vanagon after that.(mounted, needs everything finished) then Creamsicle.