Page 1 of 1
10 Gallon Spun Aluminum Tank
Posted: Sat Jan 10, 2015 12:15 pm
by cwrisley
I'm no longer needing my 10 gallon spun tank. 10x33 inches. Pick up is off the bottom as well as the return. New billet cap, end fill. Powder coat red straps included with hardware. No dents, dings, or damage. Just needs cleaned up a bit, but a solid lil tank.
I'd prefer local (SD) pickup, but can ship if needed. I'm not listing it on Craigslist, keeping it in the family!!
$50
Chris 760-445-2635
Re: 10 Gallon Spun Aluminum Tank
Posted: Sat Jan 10, 2015 3:04 pm
by danielzink
This was from a fuel injected buggy ?
Hence the return bung ?
Dan
Re: 10 Gallon Spun Aluminum Tank
Posted: Sat Jan 10, 2015 3:14 pm
by cwrisley
Yeah, I have a Subaru powered car. You could always cap the return bung.
Re: 10 Gallon Spun Aluminum Tank
Posted: Sat Jan 10, 2015 4:09 pm
by danielzink
cwrisley wrote:Yeah, I have a Subaru powered car. You could always cap the return bung.
no....
Seriously considering this for my
subaru powered sandrail.
Shipping to Michigan ?
Dan
Re: 10 Gallon Spun Aluminum Tank
Posted: Sat Jan 10, 2015 8:38 pm
by cwrisley
I have no idea the cost to ship. I'll let you know what I find out.
Re: 10 Gallon Spun Aluminum Tank
Posted: Sat Jan 10, 2015 8:41 pm
by danielzink
Awesome thanks.
48892
PM me
Dan
Re: 10 Gallon Spun Aluminum Tank
Posted: Sun Feb 01, 2015 4:52 pm
by rte592
Sent a PM
Is this still available?
Re: 10 Gallon Spun Aluminum Tank
Posted: Tue Feb 24, 2015 1:31 pm
by tikotiko
I had no idea u can weld a return on a spun tank for fuel injection motors. I thought I needed a sump this opens windows for me thank u
Re: 10 Gallon Spun Aluminum Tank
Posted: Tue Feb 24, 2015 1:34 pm
by cwrisley
Yeah, Tiko. I believe Pacific Customs sells the sump and return bung for the spun alum tanks too. Check em out!
Re: 10 Gallon Spun Aluminum Tank
Posted: Wed Feb 25, 2015 9:15 pm
by rte592
Hey Chris
Never did get that shipping price to Yuma.
Not a big deal (still looking to pick it up next time I pass thru your area)
Finding the parts to weld in is doable.
Finding a guy that is willing to weld on a gas tank is harder
