I'm looking to see if anyone remembers the speedometer adapters to put a smaller speedometer in the factory guage hole. This part is basically a ring that filled the gap between the speedometer and the hole in the dash.
Thanks
Jason
Speedometer Adapter
-
JWP
- Posts: 171
- Joined: Mon Jun 11, 2012 3:00 pm
Re: Speedometer Adapter
I'm looking for something like this
-
sideshow
- Posts: 3428
- Joined: Mon Oct 27, 2003 11:00 am
Re: Speedometer Adapter
Neat, I have never seen an adapter before. I made my own out of a thin sheet aluminum so the hold down brackets are not nearly as nice as that design.
Yeah some may call it overkill, but you can't have too much overkill.
-
JWP
- Posts: 171
- Joined: Mon Jun 11, 2012 3:00 pm
Re: Speedometer Adapter
That piece also fills in the gap between the factory opening and smaller gauges. However I think it won't be necessary for me now. I've purchased a 914 tach that I plan to put front and center and from what I can tell it is bigger than the stock speedometer opening.sideshow wrote:Neat, I have never seen an adapter before. I made my own out of a thin sheet aluminum so the hold down brackets are not nearly as nice as that design.