Page 1 of 6
***Grease your CV joint ***
Posted: Thu Sep 28, 2006 9:30 am
by Leatherneck
Needed to grease the CVs heard about this so made one, Alot less messier and shows full pack.
Empty
Front loaded
Back showing full load
Posted: Thu Sep 28, 2006 9:35 am
by scott the viking
Hey...that's pretty slick. I have enough plexi laying around to make about 40 of those things.
Posted: Thu Sep 28, 2006 12:21 pm
by takotruckin
hey scott, i'll take one, fo sho
Posted: Thu Sep 28, 2006 12:51 pm
by tuff_puff
hell yes sing me up!
i hate greaseing those bastards!
Posted: Thu Sep 28, 2006 2:02 pm
by bajaherbie
nice nipples, leatherneck.....
Posted: Thu Sep 28, 2006 3:33 pm
by Leatherneck
Speaking of nipples got the Glamis Sand Dune DVD, Thanks !
Posted: Thu Sep 28, 2006 6:46 pm
by bajaherbie
sorry it took so long, damn postal system......
Posted: Thu Sep 28, 2006 8:00 pm
by jowlz
Just out of curiosity...that is CV grease packed in there and not red high speed bearing grease? I havent seen red before...
Posted: Fri Sep 29, 2006 6:26 am
by takotruckin
i hope its some synthetic compund...
Posted: Fri Sep 29, 2006 7:46 am
by Leatherneck
No it is not a CV grease, I have to change every 4-5 months or sooner so I am trying Mystik JT-6 high temp Lithium grease. So far it has done me real well.
Posted: Wed Oct 04, 2006 8:51 pm
by Leatherneck
Hey Jowlz tore a stinking CV boot so will let you know how the grease seems to be doing.
Posted: Wed Oct 04, 2006 9:29 pm
by MNAirHead
how much --- I'll buy one.
Posted: Wed Oct 04, 2006 9:30 pm
by takotruckin
I too
Posted: Thu Oct 05, 2006 9:58 am
by Leatherneck
Guys real easy to make, (2) 1/4 X 4 1/4 lexan for up to T-2 a 4 inch bolt with nut and washers, two grease fiiting, some gasket material over a washer for axle spline area 4 minutes of your time and you are greasing like ya know what your doing.
Posted: Thu Oct 05, 2006 10:21 am
by MNAirHead
OR ... I cut you a check and take it off the todo list.