Shoptalkforums.com

Hi all, as you can see I want to put a type 3 auto into my manx, I sure somebody has done this (I know of three here in OZ). I already have some ideas floating around in my head but would like to see how others have approached the problem. In particular I'm looking at the mounting of the gearbox/engine assembly. I've been thinking about barwork spaced wider to accommodate the auto pan underneath and more over the top to create a frame to support everything. Any pictures would be greatly appreciated. Cheers mackaymanx

This is a project NOT for the faint of heart. I am in the process of doing this as well.

I have the same idea as you do. Supporting the engine/trans from underneath with a cage above for more support. I am only about 1/3 done with mine however. I've clearenced the framehorns and reshaped them. They act more as guides now then real support. Hopefully in a few weeks I'll have the mini cage done and have more pictures for you.

You can see progress here...
http://volksrods.com/forum/showthread.php?t=2469&page=3

Most of my most recent updates are here in a saved page as I lost the "blogging" feature at Volksrods...

http://www.stormseeker.org/VW/vrod/old_blog/blog1.htm


Also, I am picking up a Buggy to play with tonight as well so my updates might stretch out a bit.

Thanks for the info, I keep an eye on your progress. Good luck with the rest of your project. mackaymanx

ps you should check out these links may help you with gearbox positioning

http://forums.aussieveedubbers.com/view ... 166&page=1

http://forums.aussieveedubbers.com/view ... ?tid=41005

This is how I installed a vanagon auto in my friends VW trike

Thanks for that.