Shoptalkforums.com

namelesswonder wrote:
I hate it. Still haven't gotten ar ound to fix it, but I finally have a Sawzall at my disposal, so hopefully soon!

There. A VW related post. I never win things (except heat exchangers! though that's not exactly winning) so I figure I'll post once and see what happens.

Remember though, even though you don't like it. It could look a whole lot worse. Good luck with the nose job.

Post #6

Lotrat wrote:

MNAirHead wrote:Pricing and Lead Time?
Say I wanted one for a future engine, how much would they cost.. are these production pieces or CNC by request?

Tim

They are production units.
http://prostores2.carrierzone.com/servl ... etail?no=2
Only $199.95 each.

I'm happy to have won the first one.

How much for sand seal versions?
I saw that option but never got the price to show up.

(they misspelled anodized too.......LOL)

#2

Lotrat wrote:
I'm happy to have won the first one.

That was the last one. I move that we exclude Lotrat from any contests in the future. And futher I feel that if you go fishing with him don't let him drive the boat. I went fishing Monday didn't feel like working. I went with a so called friend of mine in his boat so he is driving. Well he says tie us up to that piling. So I do, he has almost a 330 degree of casting range which leaves me about 30 degrees to cast. Just remember that if Lotrat takes you fishing.

turboblue wrote:

Lotrat wrote:

MNAirHead wrote:Pricing and Lead Time?
Say I wanted one for a future engine, how much would they cost.. are these production pieces or CNC by request?

Tim

They are production units.
http://prostores2.carrierzone.com/servl ... etail?no=2
Only $199.95 each.

I'm happy to have won the first one.

How much for sand seal versions?
I saw that option but never got the price to show up.

(they misspelled anodized too.......LOL)

#2

I added one Sand seal serpentine belt to my Shopping Cart and total for item w/o shipping was 199.95 then I deleted it

Leatherneck wrote:

turboblue wrote:

Lotrat wrote:

MNAirHead wrote:Pricing and Lead Time?
Say I wanted one for a future engine, how much would they cost.. are these production pieces or CNC by request?

Tim

They are production units.
http://prostores2.carrierzone.com/servl ... etail?no=2
Only $199.95 each.

I'm happy to have won the first one.

How much for sand seal versions?
I saw that option but never got the price to show up.

(they misspelled anodized too.......LOL)

#2

I added one Sand seal serpentine belt to my Shopping Cart and total for item w/o shipping was 199.95 then I deleted it

Now your shopping cart is empty.

Yup, has been for awhile now.

My volkswagen is red, for Christmas!!


Im gonna paint the wheels green

#1

Very cool addition...numreo uno por mio!

WOW! That would look great next to the pile of other parts that haven't made it onto my car yet.

I'm sorry that the best VW advise I can offer is in my sig

#1

david58 wrote:

Lotrat wrote:
I'm happy to have won the first one.

That was the last one. I move that we exclude Lotrat from any contests in the future. And futher I feel that if you go fishing with him don't let him drive the boat. I went fishing Monday didn't feel like working. I went with a so called friend of mine in his boat so he is driving. Well he says tie us up to that piling. So I do, he has almost a 330 degree of casting range which leaves me about 30 degrees to cast. Just remember that if Lotrat takes you fishing.

I'm watching you david58... I'm keeping one eye on you here on out... A guy can't win 2 STF contests in a row without being back stabbed.

namelesswonder wrote:
I hate it. Still haven't gotten ar ound to fix it, but I finally have a Sawzall at my disposal, so hopefully soon!

It does kinda look like it has an under bite now that you point it out.

#2

The first Shop Talk forum logos:







Want to take a stroll down memory lane? Check out what the site looked like years ago here:

http://web.archive.org/web/200103021705 ... orums.com/

WHERE THE HECK IS THE OFF-ROAD FORUM?

Dear STF Santa
All I want for christmas is a million dollars. but I will settle for this serpentine belt get up from Kenneth Statton with MOTORSPORTSTULSA.COM that kindly donated the VW Serpentine Pulley Kit for the Shoptalkforums contest. I would like to thank Kenneth Statton for his generosity, Hedrock, and Leatherneck for making this happen.

Please STF Santa watch out for this guy

Lotrat wrote: I'm watching you david58... I'm keeping one eye on you here on out... A guy can't win 2 STF contests in a row without being back stabbed.

All I can say is don't eat no yellow snow. You never know where Santa been.

Piledriver wrote:

Piledriver wrote:

david58 wrote:

Leatherneck wrote:Does seem more OR guys are entering this, wonder why that is? Open to all of STF.

Leatherneck you are ruining my chances of winning this luxury item that I can't afford. I don't think too many people look at this News about Shoptalkforums forum. So yes it is mostly guys and gals from the ORF entering this contest. I think this is # 6 for me. If I win I will make it self adjusting have it patented and make it cheap like EMPI does.

I thought everyone always looked at "new posts" first ?

Two.

I always look at the new posts first #4

Leatherneck wrote:

turboblue wrote:

Lotrat wrote:

MNAirHead wrote:Pricing and Lead Time?
Say I wanted one for a future engine, how much would they cost.. are these production pieces or CNC by request?

Tim

They are production units.
http://prostores2.carrierzone.com/servl ... etail?no=2
Only $199.95 each.

I'm happy to have won the first one.

How much for sand seal versions?
I saw that option but never got the price to show up.

(they misspelled anodized too.......LOL)

#2

I added one Sand seal serpentine belt to my Shopping Cart and total for item w/o shipping was 199.95 then I deleted it

That's strange.
Usually a SS option is about $30.
The pulley has to be machined and a steel sleeve pressed on.
No sleeve and the seal will wear a groove into the aluminum.