So Who makes a good Crank?

cruzn56vw · Post by **cruzn56vw** » Thu Jun 27, 2002 8:40 pm

You might give ERCO a call for a crank, he has real reasonable prices. If you want a crank with all T4 main's then call Pauter, I believe they can do it for ya...for about that same price and they are a good company.

melbatoast · Post by **melbatoast** » Fri Jun 28, 2002 10:10 am

sorry, evil. it won't happen again.
i was wrong.

Bent · Post by **Bent** » Sun Jun 30, 2002 2:54 am

A full circle crank defeats the purpose of counter-weights , you do not wan't to add weight to the pin, you need to remove some.
the position and profile of the wieghts is directly related to piston and rod weights, on correctly desighned cranks.

------------------
Ben T Durie
Ben Durie Automotive Engineering