Off-Road Forum contest

Offroad VW based vehicles have problems/insights all their own. Not to mention the knowledge gained in VW durability.
Post Reply
User avatar
Lotrat
Posts: 4975
Joined: Sat Mar 29, 2008 11:43 pm

Post by Lotrat »

I missed it? Dang! Here's the short form. Is the search button broke?

Posted: Fri Sep 05, 2008 11:01 am Subject: free to a good home.... Where's that famous Bajaherbie adventurous spirit?

Posted: Fri Aug 22, 2008 10:46 am Subject: "Idiots on Parade" -STF Off-Road Baja '09 Where's Motochris, Skiddy, Bajaherbie??

Posted: Mon Aug 04, 2008 11:30 am Subject: New project. I drove it...Still not diesel, though.... Where's the reverse lockout?

Posted: Tue Jul 29, 2008 10:12 pm Subject: Hedrock's 'vert project... Where's the mud flaps? On order?

Posted: Sat Jul 19, 2008 11:36 pm Subject: Rickosuave's '69 Baja / Ricko's New Ride-'71 Baja Where'd you get those dash lights?

Posted: Fri Jul 18, 2008 9:24 am Subject: Pro Mo's adventure in rust and ruin. (A build thread) sorry for the hijack. Where's the pic Pro Mo?

Posted: Sun Jul 13, 2008 11:31 am Subject: Rickosuave's '69 Baja / Ricko's New Ride-'71 Baja Where's the pics?

Posted: Tue Jul 01, 2008 9:38 pm Subject: Swept back and down angle measurements on axles. Where's the spell check here?

Posted: Tue Jun 17, 2008 6:37 pm Subject: Bent Rear torsion Where's the pic?

Posted: Thu May 08, 2008 11:50 am Subject: difference between cast and forged explained Whereas the cross-section of spun wheels may be considerably less than .200", forged wheels can be quite thicker a ...

Posted: Wed Apr 09, 2008 5:45 pm Subject: Member Map
Wherever I go, they seem to show up eventually...

Posted: Sat Mar 22, 2008 12:09 pm Subject: tikotikos NEW baby jump video Wheres the jump?

Posted: Fri Mar 07, 2008 5:28 pm Subject: Chassis finally BACK from powder coater! Whereas wet paint polymerizes by a chemical reaction, powder polymerizes when heated.

Posted: Fri Nov 09, 2007 7:09 am Subject: Off Topic but on target. Happy Birthday Marines 51. Whereas Army, Navy and Air Force jokes are funny, Marine jokes are potentially dangerous.

Posted: Sat Nov 03, 2007 8:29 am Subject: Pics of Rails and Baja's Nobody noticed the boomerang tv antenna? Where's the tv?

Posted: Fri Oct 05, 2007 11:14 am Subject: So...you wanna go turbo?
Where's the action photos you took?


Posted: Fri Sep 07, 2007 8:00 pm Subject: **STF Off Road Stickers ARE IN!!** -- ORDER NOW!!!!! Where's the rabbit?

Posted: Tue Sep 04, 2007 4:50 pm Subject: How do you travel to the desert? Where's the originality?

Posted: Sat Aug 11, 2007 2:18 pm Subject: New humble baja build... Whereabouts in Mexico?

Posted: Tue Jul 10, 2007 7:12 pm Subject: New Front Beam Set-Up Whereas the CNC, GearOne, Tatum, type brakes were not only 15 lbs per wheel lighter, but out performed 944 style brakes by 50%.

Posted: Wed Jun 27, 2007 3:52 pm Subject: Kbwakesk8's cars ,i need help! Where's HACIENDA HEIGHTS?

Posted: Mon May 21, 2007 6:48 pm Subject: My rail project (56K go bake a cake) Where's the pix of you getting pulled over by the washington county pigs?

Posted: Mon May 14, 2007 8:44 pm Subject: Air (cooled) Supremacy lunch. Where's your green one?

Posted: Wed May 02, 2007 12:06 pm Subject: ***Frankenstien *** Where's the pics?

Posted: Sun Mar 18, 2007 9:27 pm Subject: OFF-Roaders Rides Where'd you get it?

Posted: Sun Mar 18, 2007 5:55 pm Subject: OFF-Roaders Rides Thanks for the tip Anzan. Where's it go?

Posted: Sat Mar 17, 2007 2:23 pm Subject: OFF-Roaders Rides Thanks for the tip Anzan. Where's it go? On top?

Posted: Tue Mar 13, 2007 6:55 pm Subject: Headliner Alternatives? Where's STV's version of this pix.. I remember a specific missing sticker

Posted: Mon Mar 12, 2007 12:27 pm Subject: Headliner Alternatives? Where's STV's version of this pix.. I remember a specific missing sticker

Posted: Fri Feb 23, 2007 3:08 pm Subject: Who has been to Glamis & Pismo? Where's Rasor Road?

Posted: Thu Feb 15, 2007 12:42 pm Subject: Body Rake - Body lift
Whereas the captains hat mating surface is the curved part.

Posted: Wed Feb 07, 2007 9:39 am Subject: The WinterNationals this week at Pomona Ca. Penguin nice cart. Where's the roll bar?

Posted: Sun Feb 04, 2007 9:06 pm Subject: OFF topic rant and rave Wherever it's found in the USA drill it.

Posted: Thu Feb 01, 2007 12:57 am Subject: Rickosuave's '69 Baja / Ricko's New Ride-'71 Baja Wheres Antelope Valley???

Posted: Tue Jan 30, 2007 4:30 pm Subject: Rickosuave's '69 Baja / Ricko's New Ride-'71 Baja
Where's Captain Understatement when you need him....


Posted: Wed Oct 18, 2006 5:53 pm Subject: Outer Shock mounts Where's the steering column going?

Posted: Sat Feb 11, 2006 7:58 pm Subject: Rear wheel bearings *revisited*
I've bought all new seals, bearings, and gaskets for each rear corner, anybody have any insight as to what goes Where? google netted me nothing, search button didnt either. Where oh Where is my How to Keep My VW Alive For the Complete Idiot book when I need it?

Posted: Mon Feb 06, 2006 7:27 pm Subject: Rims I bought them from the Off Road Wherehouse approx 18yrs ago.

Posted: Sat Nov 06, 2004 7:42 pm Subject: So, who has the most coinage into their baja? Where's the pics?

Posted: Tue Mar 30, 2004 6:44 pm Subject: Place to Ride?? Unclebob
Where's Middlesburg???
Top
User avatar
Leatherneck
Moderator
Posts: 17104
Joined: Sat Jul 01, 2006 6:47 pm

Post by Leatherneck »

Won't, well lets say I could not get it to come up on the search button, going to have to be a sniper. :lol: Going to have to do it the ole fashion way, read.
Top
User avatar
david58
Moderator
Posts: 14100
Joined: Sun Oct 23, 2005 6:14 pm

Post by david58 »

Posted: Thu Aug 23, 2007 1:50 pm Post subject: Where to get type 1 930 CV Stub Axles

--------------------------------------------------------------------------------

I'm looking for a pair of 930 stubs and flanges for stock diagonal arms.

The EMPI's are chromolly, but it seems like nobody like EMPI.

Where is a good place to get a set?

Anyone make them from type 1 flanges?
Hot, humid air is less dense than cooler, drier air. This can allow a golf ball to fly through the air with greater ease, as there won't be as much resistance on the ball.
Top
User avatar
david58
Moderator
Posts: 14100
Joined: Sun Oct 23, 2005 6:14 pm

Post by david58 »

Posted: Sun Aug 05, 2007 8:10 pm Post subject: ...So, where'd you put yours?
Hot, humid air is less dense than cooler, drier air. This can allow a golf ball to fly through the air with greater ease, as there won't be as much resistance on the ball.
Top
User avatar
Lotrat
Posts: 4975
Joined: Sat Mar 29, 2008 11:43 pm

Post by Lotrat »

Oh well, good luck to those that read all the posts. I got wheels to paint... It's almost dark. Thanks for the challenge. The prize was too shiny for my baja anyway. :cry:
Top
User avatar
david58
Moderator
Posts: 14100
Joined: Sun Oct 23, 2005 6:14 pm

Post by david58 »

Posted: Thu May 24, 2007 3:15 pm Post subject: Where's the Beef... err power!?
Hot, humid air is less dense than cooler, drier air. This can allow a golf ball to fly through the air with greater ease, as there won't be as much resistance on the ball.
Top
User avatar
Lotrat
Posts: 4975
Joined: Sat Mar 29, 2008 11:43 pm

Post by Lotrat »

Leatherneck wrote:Won't, well lets say I could not get it to come up on the search button,...
Just think of all the newbies that have been scolded for not using the search. All this time and it doesn't work anyway.
Top
User avatar
Leatherneck
Moderator
Posts: 17104
Joined: Sat Jul 01, 2006 6:47 pm

Post by Leatherneck »

We don't scold for not using the search, not about the search. It is about the knowledge. 8) Over here you have a question ask, we don't mind helping out.
Top
User avatar
david58
Moderator
Posts: 14100
Joined: Sun Oct 23, 2005 6:14 pm

Post by david58 »

Posted: Sun May 20, 2007 8:20 pm Post subject: where to get a fire extinguisher?

--------------------------------------------------------------------------------

Where is the best place to get a fire extinguisher that can be mounted to 1.5" tubing? I remember an add somewhere a while ago of a guy selling them with VW logos on them or something. Anyone else see that and know if they can still be purchased
Hot, humid air is less dense than cooler, drier air. This can allow a golf ball to fly through the air with greater ease, as there won't be as much resistance on the ball.
Top
User avatar
david58
Moderator
Posts: 14100
Joined: Sun Oct 23, 2005 6:14 pm

Post by david58 »

Posted: Fri May 04, 2007 12:42 pm Post subject: Weapons where to mount

--------------------------------------------------------------------------------

Any ideas on where to mount a riffle in a caged baja?
Hot, humid air is less dense than cooler, drier air. This can allow a golf ball to fly through the air with greater ease, as there won't be as much resistance on the ball.
Top
User avatar
david58
Moderator
Posts: 14100
Joined: Sun Oct 23, 2005 6:14 pm

Post by david58 »

Posted: Thu Feb 22, 2007 2:00 am Post subject: Where to cut?

--------------------------------------------------------------------------------

Been trying to figure out where I need to make the cut. I am getting a mark 5 (http://markvfiberglass.com/catalog/fron ... dK105.html) and am wondering where I should make the cuts. Anyone have any good pics of where you did it? Here is what I am thinking...
Hot, humid air is less dense than cooler, drier air. This can allow a golf ball to fly through the air with greater ease, as there won't be as much resistance on the ball.
Top
User avatar
david58
Moderator
Posts: 14100
Joined: Sun Oct 23, 2005 6:14 pm

Post by david58 »

Posted: Tue Jan 09, 2007 11:38 pm Post subject: Where to put a spare tire in a glass body buggy?

--------------------------------------------------------------------------------

Just had a thought... If I plan on having pasengers (my kids) in the back seat of my buggy where can I carry a spare? Any creative ideas?

And what do you guys do to deal with having different size tires (front vs. rear)... what size spare, the rear?
Hot, humid air is less dense than cooler, drier air. This can allow a golf ball to fly through the air with greater ease, as there won't be as much resistance on the ball.
Top
User avatar
Hedrock
Moderator
Posts: 3251
Joined: Sun Mar 04, 2007 7:49 pm

Post by Hedrock »

David58bug... Are you seeing double yet? :wink:
Collecting parts again... No I'm not going to say why!
Top
User avatar
david58
Moderator
Posts: 14100
Joined: Sun Oct 23, 2005 6:14 pm

Post by david58 »

Posted: Mon Sep 25, 2006 7:25 pm Post subject: Where do you mount your driving lights?

--------------------------------------------------------------------------------

Ok... I need more light.. I drive in the woods..under trees..I tend to knock off anything on top...where do you guys mount your off road lights? I want to see pics of everything..even top mounted just to get an ideal..I would like to see some mounted on some sort of "side brackets" I would like to know where to find these "brackets" as well... thanks
AKB
Hot, humid air is less dense than cooler, drier air. This can allow a golf ball to fly through the air with greater ease, as there won't be as much resistance on the ball.
Top
User avatar
david58
Moderator
Posts: 14100
Joined: Sun Oct 23, 2005 6:14 pm

Post by david58 »

Tue Aug 29, 2006 3:25 pm Post subject: Where to Cut for a bugeye kit?

--------------------------------------------------------------------------------

Anyone have a pic or a diagram of where to cut my front and rear for the bugeye kit?

......................................................................................................
Posted: Wed Aug 30, 2006 8:09 pm Post subject:

--------------------------------------------------------------------------------

Don't know if this is the best way but why not mount the front hood then leave a few inches or so sticking out past where the front of the hood stops at,draw a line and cut. As for the rear mount the fenders and line up the top piece where it matches the back of the fender.Mark where the come to on the body,then cut.

........................................................................................................
Posted: Wed Aug 30, 2006 9:24 pm Post subject:

--------------------------------------------------------------------------------

bajaherbie wrote:


go to barnes and noble bookstore and sit in the corner with the book and take notes....


he'd fit right in. i went there the other day looking for a book for school. freaking people on the floor everywhere. cant even look at the books!!
........................................................................................................
Hot, humid air is less dense than cooler, drier air. This can allow a golf ball to fly through the air with greater ease, as there won't be as much resistance on the ball.
Top
Post Reply

Return to “The Off-Road Forum.”