'68 Westy and a K20a swap...I ain't right ;)

supaninja · Post by **supaninja** » Wed Apr 17, 2013 7:49 pm

Just a teaser

MarioVelotta · Post by **MarioVelotta** » Wed Apr 17, 2013 9:01 pm

Yeah yer!

Zander · Post by **Zander** » Thu Apr 18, 2013 7:28 am

Think your gonna be ready by the weekend? I'm thrashing to get a mini bike done to cruise the show

Looks sweet btw!

supaninja · Post by **supaninja** » Thu Apr 18, 2013 12:42 pm

Doesn't look like it Zander

I still need to finish the rear mounts, exhaust, plumbing, and electrical. Then I need to figure out how to make it run.

55superbeetle · Post by **55superbeetle** » Thu Apr 18, 2013 4:21 pm

supaninja wrote:Doesn't look like it Zander I still need to finish the rear mounts, exhaust, plumbing, and electrical. Then I need to figure out how to make it run.

So what's the problem?

supaninja · Post by **supaninja** » Thu Apr 18, 2013 4:37 pm

The problem is there is only 24 hrs in a day

gearheadgreg · Post by **gearheadgreg** » Thu Apr 18, 2013 8:18 pm

Looking good man - keep plugging away. Most of my poop ain't running and aint as close as this!

panel · Post by **panel** » Fri Apr 19, 2013 6:49 am

supaninja wrote:Just a teaser

Supa......What's the outer dimension of that rad and was it an off the shelf rad from them? Part # ?

supaninja · Post by **supaninja** » Fri Apr 19, 2013 7:45 pm

It's an off the shelf AFCO here is the link http://www.speedwaymotors.com/AFCO-8010 ... 43554.html there are three different "Scirocco" style ones.

Got the rear mounts done and halfway done with the exhaust. Pretty much all that's left is the plumbing and wiring.

http://i59.photobucket.com/albums/g296/ ... 6845d4.jpg (STF wouldn't let me post this one)

Greg- I got the window in...in one piece too

Thanks buddy!

gearheadgreg · Post by **gearheadgreg** » Fri Apr 19, 2013 8:04 pm

Yeah! Heh. If you didn't have a spare, you would have broken this one, too. That's how it works.

Looking good - will be anxious to see the rolling videos of this one.

supaninja · Post by **supaninja** » Sat Apr 20, 2013 8:08 pm

finished up the exhaust then sealed the fuel tank. I still need to fix the clutch then the motor is going back in...for good this time!

panel · Post by **panel** » Sun Apr 21, 2013 1:31 pm

Quite an aggressive tire eh ?

Steve Arndt · Post by **Steve Arndt** » Sun Apr 21, 2013 1:43 pm

BFG AT

supaninja · Post by **supaninja** » Sun Apr 21, 2013 6:15 pm

panel wrote:Quite an aggressive tire eh ?

It's my SHTF vehicle

supaninja · Post by **supaninja** » Wed Apr 24, 2013 7:23 pm

So my epic 10 day/night thrash to swap the K20 into the Westy ended in great success...well sort of. It runs but I have a loss of fuel pressure issue that will probably be super easy to fix and I ran out of time to get the wiring so it won't be a fire hazard. I want to give a huge shout to Mario for all the help he gave me holy crap is MS3x confusing compared to MS1, Mario spent most of the day yesterday helping...that was awesome. I also learned that K20's have smart coils and Hall crank sensors who would have thunk it. I can't wait to take it for a spin, that motor revs very freely.

Shoptalkforums.com

'68 Westy and a K20a swap...I ain't right ;)

Re: '68 Westy and a K20a swap...I ain't right ;)

Re: '68 Westy and a K20a swap...I ain't right ;)

Re: '68 Westy and a K20a swap...I ain't right ;)

Re: '68 Westy and a K20a swap...I ain't right ;)

Re: '68 Westy and a K20a swap...I ain't right ;)

Re: '68 Westy and a K20a swap...I ain't right ;)

Re: '68 Westy and a K20a swap...I ain't right ;)

Re: '68 Westy and a K20a swap...I ain't right ;)

Re: '68 Westy and a K20a swap...I ain't right ;)

Re: '68 Westy and a K20a swap...I ain't right ;)

Re: '68 Westy and a K20a swap...I ain't right ;)

Re: '68 Westy and a K20a swap...I ain't right ;)

Re: '68 Westy and a K20a swap...I ain't right ;)

Re: '68 Westy and a K20a swap...I ain't right ;)

Re: '68 Westy and a K20a swap...I ain't right ;)