what is everyone cutting with?

terry cloyd · Post by **terry cloyd** » Fri Dec 15, 2006 6:08 pm

Tim sorry that OSHA fined you. I have never had OSHA come to my home to inspect what I was doing.

Tim if you have a problem of centering the wheel over the shaft, then buy the blade that fits the tool.

I am a licenced contractor for 27 years with no OSHA violations.

takotruckin · Post by **takotruckin** » Fri Dec 15, 2006 6:14 pm

terry cloyd wrote:Tim I don't work for Simpson. I work for my brother Smart Comp & Calif Truss and Zone Four. I built our wall test rack. Its 50,000 lbs rack.

now just WTF does that do for the conversation?

scott the viking · Post by **scott the viking** » Fri Dec 15, 2006 6:32 pm

I like Cheetos

MNAirHead · Post by **MNAirHead** » Fri Dec 15, 2006 6:51 pm

terry cloyd wrote:Tim sorry that OSHA fined you. I have never had OSHA come to my home to inspect what I was doing.

Tim if you have a problem of centering the wheel over the shaft, then buy the blade that fits the tool.

I am a licenced contractor for 27 years with no OSHA violations.

]

Once again.. it's not centering the wheel.... it's fitting a flat wheel over an area that's engineered to accept a bell shaped distressed wheel.

OSHA violations.. because you haven't had a fine doesn't mean you're not capable - they normally will not search your home.

It's amazing the stupid stuff folks do when you're not babysitting. ..

SANDDUDE · Post by **SANDDUDE** » Sat Dec 16, 2006 4:08 pm

Was DubsMcGee using one of Terry's cutting Disc's?

DubsMcGee wrote:

Post by **Daniel G** » Sat Dec 16, 2006 8:41 pm

http://www.osh.govt.nz/order/catalogue/ ... quarry.pdf

This guy wasn't even using some crappy homemade adapter on his grinder, and it ended up killing him. So everyone should keep that in mind...

Daniel

takotruckin · Post by **takotruckin** » Sat Dec 16, 2006 8:47 pm

OSH Guys wrote:Do not use grinding wheels that are larger than the maximum recommended size, or worn down wheels from other grinders

but then, what do they know?

Post by **david58** » Sat Dec 16, 2006 9:11 pm

Why don't Hacksaws have guards on them?

scott the viking · Post by **scott the viking** » Sat Dec 16, 2006 10:19 pm

If I wasn't so modest (and fat) I would show you my mid section...I had a cut off wheel explode and gut me like a fish....51 stitches worth...probably due to my inexperience though.

MNAirHead · Post by **MNAirHead** » Sun Dec 17, 2006 2:36 am

scott the viking wrote:If I wasn't so modest (and fat) I would show you my mid section...I had a cut off wheel explode and gut me like a fish....51 stitches worth...probably due to my inexperience though.

That's not a belly... it's a love fulcrum

bajaherbie · Post by **bajaherbie** » Sun Dec 17, 2006 6:04 am

here is my rant. i have a 14" dewalt metal chop saw. mosts store around here sell 3/16 " thick dewalt abrasive blades for 4-5 bucks, i've even seen 'em cheap as 3 for $10. but if you install one and turn the saw on the dang things flex around and flop liks pizza dough being tossed in the air.

looks like an accident waiting to happen and i don't like blood especially mine!

as a result i have to really shop around and find the 5/64 " thick blades blades made by Forney. once i found a 5/64" dewalt blade at lowes but that store is an hour drive one way....

you think dewalt would test their own products....

terry cloyd · Post by **terry cloyd** » Sun Dec 17, 2006 9:50 am

Well Tim it looks like all your buddies show up. It looks like the cuff off blade is equal to the AK 47. Do you think that they use them in West LA?

Like I said " buy the blade that fits the tool " Please keep the hate letters coming in.

scott the viking · Post by **scott the viking** » Sun Dec 17, 2006 9:57 am

I hate Tim.

terry cloyd · Post by **terry cloyd** » Sun Dec 17, 2006 10:27 am

scott the viking wrote:I hate Tim.

That's BS and we both know it

MNAirHead · Post by **MNAirHead** » Sun Dec 17, 2006 1:28 pm

scott the viking wrote:I hate Tim.

Me too!