Page 15 of 148

Re: Tim's baja projects...

Posted: Wed Apr 13, 2011 8:44 pm
by madmitch
I built a 4 into 1 exhaust for my dwarf car using an Extreme racing muffler. It is very light and has a very nice tone for the Suzuki GXSR 1000 engine. It may be a little more than you want to spend.www.extrememufflers.com/[img]http://i45 ... 010030.jpg[/img]

Re: Tim's baja projects...

Posted: Thu Apr 14, 2011 4:00 am
by TimS
bajaherbie wrote:OMG
My thoughts exactly!!

Thanks for the ideas, Mitch. I'm trying to figure out how you bent and tweaked all that pipe. Looks like yuo just take a section cut it, and weld on another section. Wouldn't be too bad, just time consuming, I guess.

Thanks for the comment.

Re: Tim's baja projects...

Posted: Thu Apr 14, 2011 1:19 pm
by TimS
I got a plan for the exhaust, I have enough tubing to do it, but I need one more of the right hand subaru flanges. Went to the junkyard and they didn't have one, they've been crushing cars like crazy with the price of steel nowadays. I'm going to go behind the oil pan, over to the other side, join the two right near the left header, go forward, up, then back to a muffler right next to the valve cover, similar to where the left hand glass pack is now. So it looks like I'll have to cut and turn the left hand header I have. That will wait a few weeks, I need the bug this weekend.

Also got the windshield wipers going. I recieved the 12volt armature from WW, but there seems to be a missing bushing on the inside of it. Waiting to hear from them. In the meantime, I just wired up a 50 watt bulb in series and the 6v motor works great!

AND... Let there be HEAT!!
heater-1.jpg
heater-2.jpg

Re: Tim's baja projects...

Posted: Thu Apr 14, 2011 2:26 pm
by bajaherbie
winter is over... what is that heater from? looks like military issue?

Re: Tim's baja projects...

Posted: Thu Apr 14, 2011 2:55 pm
by Qurtys Lyn
It ain't over here yet. It was snowing today. And he's due north from me. :D

Re: Tim's baja projects...

Posted: Thu Apr 14, 2011 6:49 pm
by TimS
bajaherbie wrote:winter is over... what is that heater from? looks like military issue?
Mostly just looking for defrost on those chilly high-desert mornings... It's from a military jeep (suposedly), it's 24 volts, but work fine on 12.

Re: Tim's baja projects...

Posted: Thu Apr 14, 2011 7:17 pm
by bajaherbie
at ease, soldier!

Re: Tim's baja projects...

Posted: Thu Apr 14, 2011 7:23 pm
by TimS
Yes, Sir. I'm going to get the scotch as we speak.

Re: Tim's baja projects...

Posted: Thu Apr 14, 2011 9:47 pm
by Lotrat
Looks nice and cozy back there. I could take a nap.

Re: Tim's baja projects...

Posted: Thu Apr 14, 2011 9:50 pm
by Steve Arndt
Lotrat wrote:Looks nice and cozy back there. I could take a nap.
Needs some shag headliner. water bed?

Sweet heater! Almost worth going liquid cooled for the ease of ducting heat.

Re: Tim's baja projects...

Posted: Thu Apr 14, 2011 9:52 pm
by Leatherneck
How loud is it. Nice addition for sure.

Re: Tim's baja projects...

Posted: Thu Apr 14, 2011 10:09 pm
by TimS
Leatherneck wrote:How loud is it. Nice addition for sure.
Not very. Certainly not as loud as the car exhaust or the fuel pump for that matter, but not any louder than a normal heater in a car.

Hopefully the sounds of bouncing mouse poop in the heater channels will go away after a while.

Re: Tim's baja projects...

Posted: Thu Apr 14, 2011 10:27 pm
by TimS
Steve Arndt wrote:Needs some shag headliner.
I'm seriously consider something like that for noise control.

Re: Tim's baja projects...

Posted: Thu Apr 14, 2011 10:31 pm
by Steve Arndt
If you get the 2.5" ORANGE dangle shag it will attenuate the 3250 RPM 500 Hz drone. I have studied this.

Re: Tim's baja projects...

Posted: Fri Apr 15, 2011 10:16 am
by TimS
Steve Arndt wrote:If you get the 2.5" ORANGE dangle shag it will attenuate the 3250 RPM 500 Hz drone. I have studied this.
Do you have any data to support that? :wink:


Thightened up the steering box today, put a urethane bushing on the steering shaft, streightened out my steering wheel. It's feel so much better now.

Drove it around with the back seat set in there. Seems much quieter already.


HEATER--- I'm not all that impressed with the heater. Seems like it's not blowing out super hot air. and the coolant comming out is super hot. Maybe it just takes a while to heat up the heater channels or something. It did keep me warm this morning, though. I'm still undecided.