181 Parts Swap and Sell

turbo_girl · Post by **turbo_girl** » Mon Feb 24, 2003 6:12 pm

I could use a fan shroud... anybody got one in nice shape?

[email protected]

Thanks!
Heather

Bob Ingman · Post by **Bob Ingman** » Mon Feb 24, 2003 7:47 pm

Heather can we assume that you need a fan shroud for a 73 Thing since the 74 shroud is the same as that of the beetle? Good luck. Bob Ingman

851duck · Post by **851duck** » Tue Feb 25, 2003 5:58 am

bdj,
I'm interested in your front fenders. My Dad lives about an hour and a half north of Ottawa. Where are you? I'm in the states in Pennsylvania.
Let me know if they are still available.
Thanks,
John
[email protected]

turbo_girl · Post by **turbo_girl** » Tue Feb 25, 2003 6:27 am

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Bob Ingman:
Heather can we assume that you need a fan shroud for a 73 Thing since the 74 shroud is the same as that of the beetle? Good luck. Bob Ingman<HR></BLOCKQUOTE>

You are correct Bob- my bad, I should've said that I wanted a '73 shroud. Thanks - Heather

bljones · Post by **bljones** » Tue Feb 25, 2003 7:40 am

yep, fenders are still available. e-mail me directly at [email protected]

851duck · Post by **851duck** » Tue Feb 25, 2003 5:49 pm

bdj,
Tried to email you today. Did I get the address right?
Thanks,
John

Bruce2 · Post by **Bruce2** » Tue Feb 25, 2003 9:50 pm

I have ZF limited slip diffs for your T181 and can deliver it to SoCal in a couple of weeks.

bljones · Post by **bljones** » Wed Feb 26, 2003 8:45 am

851, yep, you got the address right... return e-mail is on it's way to you.

Mattt · Post by **Mattt** » Thu Feb 27, 2003 12:28 am

73 Thing parting out, rusty, good for a prerunner project. I have the body shell, pan, complete front and rear suspension, gas tank, 14" non stock rims, decklid and hood that need work, misc other. Im in Anaheim, CA
714-701-1723

timgud · Post by **timgud** » Thu Feb 27, 2003 8:12 pm

Anyone have an extra latch for the top frame? The part that attatches to the top,and secures the top frame to the winshield frame.

petevw · Post by **petevw** » Sun Mar 02, 2003 12:07 am

WANTED:

tranny output shafts

type 181 Thing inner flanges that have 33T x type2 CV

i need 2, but 4 would be nice so i have a couple extra.

thanks,
pete

lastsafari · Post by **lastsafari** » Sun Mar 02, 2003 8:41 pm

timgud:
Mike Basso has some brand new nos.

BobMiller · Post by **BobMiller** » Sun Mar 02, 2003 10:40 pm

Cleaning out my garage: (Locking Gas Cap - Sold) New Combo Radio Mount and glove compartment door, Thing Shop parts, no lock or key, needs a little clean up $75.00; New Thing Shop split style exhaust system, use with "J" tubes or heat exchangers, 3 years old, never mounted or used $120.00. e-mail or phone [email protected] 909-776-1935

------------------
1966 MANX SR2 (Karma Coachworks), 1974 VW THING

[This message has been edited by BobMiller (edited 03-03-2003).]

[This message has been edited by BobMiller (edited 03-04-2003).]

Thingguy · Post by **Thingguy** » Wed Mar 19, 2003 8:35 pm

I have the shell of a 74 THING that I will need out of my way soon. I am
keeping the front from the gas tank forward but can cut off another section
to please. The rockers have some rust but I have seen much worse. I am in
Kansas City, Missouri & will drive a couple of hours or so for gas money to
help get it to you. I also have various other parts, let me know what you
need & I'll let you know if I have it. I will be heading to Branson Missouri towards the end of May, could possibly bring it with me. E-mail me for pictures.
Thanks!
[email protected]

germansupplyscott · Post by **germansupplyscott** » Thu Mar 20, 2003 4:07 pm

i have two rear pan sections, these are the ones that go from behind the seat rails back. they are ghia pan sections, heavy duty made by tabco and are new.

scott lyons