Off-Road Forum contest

fgrir · Post by **fgrir** » Tue Sep 09, 2008 8:06 pm

congrats Lotrat, You earned it.

Post by **Hedrock** » Tue Sep 09, 2008 8:34 pm

Congratulations Lotrat. I know this was not an easy contest to win but, it wasn't meant to be. It was meant to get people to do some digging and learn a few things. From the moaning and groaning I saw and the threads that were bumped I think it did do just that. I would hope that from time to time all of us would go back into the old threads and look around. There is a huge amount of info in this forum that doesn't need to just slip away

.

Thank you for your efforts and we would really like for you to start a build thread on your car and for sure the new "BLING" installation!

rickosuave1987 · Post by **rickosuave1987** » Tue Sep 09, 2008 10:37 pm

Hedrock, i think you have my mailing address...

Lotrat is my neighbor and I will gladly deliver the prize to him...

after i thoroughly test it of course

Lotrat · Post by **Lotrat** » Tue Sep 09, 2008 10:39 pm

rickosuave1987 wrote:Hedrock, i think you have my mailing address...

Lotrat is my neighbor and I will gladly deliver the prize to him...

after i thoroughly test it of course

I'm on to this little STF small white font game...

rickosuave1987 · Post by **rickosuave1987** » Tue Sep 09, 2008 10:41 pm

Who changed my post?!?!

Some sneaky moderators weve got around here...
what about the super tiny font game?

Lotrat · Post by **Lotrat** » Tue Sep 09, 2008 10:45 pm

rickosuave1987 wrote:

Who changed my post?!?!

Some sneaky moderators weve got around here...
what about the super tiny font game?

Nope, same kind of trick. You need something new. I like this game:

Post by **david58** » Tue Sep 09, 2008 11:50 pm

rickosuave1987 wrote:Hedrock, i think you have my mailing address...

Lotrat is my neighbor and I will gladly deliver the prize to him...

after i thoroughly test it of course

Cheese and Rice Testers

bajaherbie · Post by **bajaherbie** » Wed Sep 10, 2008 10:35 am

congrats from a sore loser!

i didn't get to search much because my wi-fi signal has been sporadic at best lately.

plus my 13 yr old has started his own Myspace page and now i have to share the computer with him.

he is going to have to get a job and buy his own computer

Jason C · Post by **Jason C** » Wed Sep 10, 2008 11:45 am

Your going to need a smaller exhaust to show off your new bling.

Lotrat · Post by **Lotrat** » Wed Sep 10, 2008 12:25 pm

Jason C wrote:Your going to need a smaller exhaust to show off your new bling.

I hear that's the prize for the next contest.

------------------
Lotrat - President of the rusty header club.

Post by **Hedrock** » Wed Sep 10, 2008 12:28 pm

Lotrat wrote:
Jason C wrote:Your going to need a smaller exhaust to show off your new bling.
I hear that's the prize for the next contest.

------------------
Lotrat - President of the rusty header club.

Don't push your luck Sparky

Post by **Hedrock** » Wed Sep 10, 2008 5:06 pm

Lotrat... Your "Bling" is boxed and will be shipped tomorrow by Fed-Ex. I will pm you a tracking # when I get one.

Thanks again and enjoy it

.

Lotrat · Post by **Lotrat** » Mon Sep 22, 2008 3:39 pm

Just an update on the whereabouts of the bling. Fed-Ex put a ding in my bling! You won't be able to see it when it's spinning....

So I ran over to VW-Paradise with the pulley the day I got it. Dropped it on the counter and said I needed a sand seal. He came back with EMPI's green one, orange one, and the press in version. None of them fit. So I shot an email back to Kenneth at MST asking for the part number for the seal that fits. He just got back from vacation today and he told me that only a Scatt seal will fit even though their web site and instructions state, "Aluminum Sand Seal Mount. Fits Scatt and EMPI Seal Designs." No big deal, I just need to find the right seal. If you ask me, they should include the seal in the kit. I'll keep you all posted.

Post by **david58** » Mon Sep 22, 2008 4:11 pm

Lotrat wrote:Just an update on the whereabouts of the bling. Fed-Ex put a ding in my bling! You won't be able to see it when it's spinning....

So I ran over to VW-Paradise with the pulley the day I got it. Dropped it on the counter and said I needed a sand seal. He came back with EMPI's green one, orange one, and the press in version. None of them fit. So I shot an email back to Kenneth at MST asking for the part number for the seal that fits. He just got back from vacation today and he told me that only a Scatt seal will fit even though their web site and instructions state, "Aluminum Sand Seal Mount. Fits Scatt and EMPI Seal Designs." No big deal, I just need to find the right seal. If you ask me, they should include the seal in the kit. I'll keep you all posted.

Well if you don't want the bling send it to me I will find the correct seal for it.