VW EFI parts from México

Theo · Post by **Theo** » Thu Jul 12, 2007 1:27 pm

I would like to give Aldo a bump for being a great supplier. The latest set I purchased from him is just abour running on my brothers rail.

Thanks!

Theo

AldoQ · Post by **AldoQ** » Mon Aug 13, 2007 10:47 am

Thanks Theo
Theo you have pictures of the rail?
i have 8 complete sets now, or ask for vw stuff
regards

quickkafer · Post by **quickkafer** » Mon Aug 13, 2007 11:05 am

While I didn't wind up buying from Aldo, I would highly recommend him. His email communication is great!

Just as a side note, the only reason why I did NOT buy from Aldo is that I'm going with a bigger set up and the Stock Mexican system won't work for what I need. Unfortunately, I'll be spending too much money on having a custom plenum built with an intercooler.

But if you are not as crazy in the head as I am, you should definitely consider buying your Mexican EFI parts from Aldo!

Scott Faivre

AldoQ · Post by **AldoQ** » Mon Aug 13, 2007 11:29 am

Thanks Scott

AldoQ · Post by **AldoQ** » Fri Nov 30, 2007 8:16 am

HI
if any one wants a Mexi bug, i can buy here in México and put in laredo TX border , and any one can import as parts, for that the bug need to come without engine
this link is for a local news paper, if any wants to find some VW
http://avisos.elnorte.com/vehiculo.asp
regards

Manny · Post by **Manny** » Sun Dec 02, 2007 9:03 am

What would the cost be to get a beetle minus engine across the border?

AldoQ · Post by **AldoQ** » Tue Dec 04, 2007 10:31 am

Hi
the cost is US$700
i can seach the bug for you, or you find them, i can take pictures and send by email, you send me the money by paypal i pay the bug plus my money and you have your bug in the border laredo tx or mcallen tx

AldoQ · Post by **AldoQ** » Tue Dec 04, 2007 10:38 am

for example this bug
http://avisos.elnorte.com/avisos_detallew.asp
US$4476 in McAllen or Laredo TX

quickkafer · Post by **quickkafer** » Tue Dec 04, 2007 9:33 pm

AldoQ wrote:for example this bug
http://avisos.elnorte.com/avisos_detallew.asp
US$4476 in McAllen or Laredo TX

Your link is not working for me.

So Aldo, your fee is $700? or a car (Vocho) is $700?

Scott Faivre

Post by **Piledriver** » Tue Dec 04, 2007 9:56 pm

VWGirl wrote:good to have another source for parts for my mexi! that fuel pump looks crazy!

Looks like a combo pump/sump, meant to be fed by a feeder pump.
Nice setup.

How much does it run?

Post by **Piledriver** » Tue Dec 04, 2007 10:03 pm

quickkafer wrote:While I didn't wind up buying from Aldo, I would highly recommend him. His email communication is great!

Just as a side note, the only reason why I did NOT buy from Aldo is that I'm going with a bigger set up and the Stock Mexican system won't work for what I need. Unfortunately, I'll be spending too much money on having a custom plenum built with an intercooler.

But if you are not as crazy in the head as I am, you should definitely consider buying your Mexican EFI parts from Aldo!

Scott Faivre

Ineresting info on Jenveys website, they indicated that a single TB of 42mm was good to >240HP in a plenum based NA setup, based on their tests, no power gain going larger. (Of course the manifold design would have to have large enough runners, big enough plenum etc)

TKisner · Post by **TKisner** » Wed Dec 05, 2007 7:12 am

Hi aldo,
I sent you a email please respond asap.

AldoQ · Post by **AldoQ** » Wed Dec 05, 2007 7:56 am

TKisner
im send an email to you
regards

AldoQ · Post by **AldoQ** » Wed Dec 05, 2007 8:02 am

quickkafer
sorry fot the bad link
i want US$700 for my service
here in México for example a 1990 bug with 37000Km cost $US1900 plus my 700 = total US$2600 for a bug in the laredo border without engine

AldoQ · Post by **AldoQ** » Wed Dec 05, 2007 8:06 am

Piledriver
this is a pierburg fuel pump, yes is a pump in the sump
the spects
43.5 psi 115 l/h @ 12V 4.8amp
regards

Shoptalkforums.com

VW EFI parts from México

Mexi bugs in laredo Border

cost

example

Re: example

hi

hi

hi