Lets see your welding and fabrication tools

Post by **david58** » Sat May 05, 2007 7:35 am

Store bought or homemade it doesn't matter. Tubing clamps, jigs, saws you name lets see it.

Post by **david58** » Sat May 05, 2007 2:12 pm

Tubing Clamps

I lost the url to these.

Post by **david58** » Thu May 17, 2007 11:04 pm

Noone has any welding and fabrication tools?

sammyphsyco · Post by **sammyphsyco** » Fri May 18, 2007 2:39 am

click on this pic for detail. It's a Meco model N Midget air craft torch. 3/16 is pushing the capabilities of it. It really shines on thin sheet metal. Gas welding is becoming a lost art, but this torch offers at least as much control as any TIG machine for thin sheet metal, including aluminum and stainless. It cost 110$, and is very,very easy on the bottles. 5 psi is a lot of gas for this torch.

earthquake · Post by **earthquake** » Mon Aug 02, 2010 9:59 pm

OK
Here are some of my tools I have made or are in progress

Engine stand

IMGP0243 (2).JPG

IMGP0242 (2).JPG

Modified HF bead roller

IMGP0280.JPG

I run a water jet machine where I work, its amazing what you can make on one of these things.

Casey

earthquake · Post by **earthquake** » Mon Aug 02, 2010 10:04 pm

Here some more

Cylinder bore gauges

IMGP0207.JPG

English wheel in progress

IMGP0281.JPG

I have a few more irons in the fire , I will post as they are finished.

Casey

motorbreath53 · Post by **motorbreath53** » Tue Aug 03, 2010 10:56 am

My recently finished fabrication bench/ bender cart...

CLKWRK · Post by **CLKWRK** » Thu Aug 05, 2010 8:01 am

This get used often to get aftermarket parts to fit properly

old school belt drive Bust Bee 12x24

ShopTalk Forums | Aircooled VW Tech & Restoration Help

Lets see your welding and fabrication tools

Lets see your welding and fabrication tools

Re: Lets see your welding and fabrication tools

Re: Lets see your welding and fabrication tools

Re: Lets see your welding and fabrication tools

Re: Lets see your welding and fabrication tools