Headliner Alternatives?
- nukeworker
- Posts: 239
- Joined: Wed Nov 15, 2006 7:46 pm
Headliner Alternatives?
Just thinking. Anyone know of an alternative to a headliner. Want some cushion and sound dampening without the hassle of installing a nice headliner.
- Leatherneck
- Moderator
- Posts: 17104
- Joined: Sat Jul 01, 2006 6:47 pm
- subybaja
- Posts: 529
- Joined: Wed Jul 05, 2006 3:56 pm
Dynamat?
I'm seriously planning to use a layer of Reflectix, that mylar-coated bubblewrap insulation, with the stock bows. Kinda chilly here. It should work the other way for you, keeping it a little cooler.
And paint on the interior body surfaces. The only place upholstery belongs in a baja is the seat, IMHO.
I'm seriously planning to use a layer of Reflectix, that mylar-coated bubblewrap insulation, with the stock bows. Kinda chilly here. It should work the other way for you, keeping it a little cooler.
And paint on the interior body surfaces. The only place upholstery belongs in a baja is the seat, IMHO.
- bajaherbie
- Posts: 9967
- Joined: Sat Jul 15, 2006 7:07 pm
- ntsqd
- Posts: 2291
- Joined: Tue Jan 30, 2007 11:58 am
Just had to have my '91 Sub's headliner re-done. I've glued Reflectix to the under side of the roof. Yesterday was sunny & about 75*f. That big ole black roof was getting HOT, even on the underside. The bottom surface of the Reflectix was 15*-20* cooler than the sheetmetal. I'm hoping this foretells the future.....subybaja wrote:Dynamat?
I'm seriously planning to use a layer of Reflectix, that mylar-coated bubblewrap insulation, with the stock bows. Kinda chilly here. It should work the other way for you, keeping it a little cooler.
And paint on the interior body surfaces. The only place upholstery belongs in a baja is the seat, IMHO.
Cross-threaded is tighter than Lock-tite
-
- Posts: 7420
- Joined: Sat Mar 10, 2001 12:01 am
I brushed on Rustoleum gloss white and convered it with stickers. It is a nasty job cleaning up the old yellow spray glue!
Steve
My Baja Build
My Baja Build
- bajaherbie
- Posts: 9967
- Joined: Sat Jul 15, 2006 7:07 pm