I've got a 69 beetle that im getting ready for body and paint work so ive removed the wiring but now i have to move it and my drive way sucks. The engine is still in so how can i start it with no ignition switch can i jump it at the coil or somthing I am new at the vw thing so any help would be cool, I checked the wiring diagrams on here but was pretty lost.
well i tried the above post and the motor turns over it just wont start its been sitting for a month or so sense it was last started am is there somthing else i need to do , thanks.
Yeah the bat is good, spark I didnt check ,the plugs,condensor,dis cap,oil are all a month old with maybe 500 miles on them the timeing was set a couple days before it was parked I will go check for spark and let you know, thanks for the replies.
Ok I got it running thanks to jims web site the problem was no power at the coil ,sense I dont have the igniton switch in I had to jump the black wire from the harness to power once I did that it fired right up. thanks for the help folks.
