vertigate shifter for 091

[kgturbo]

Does anyone know of a manufacturer of a vertigate for an 091 or do they only make it for the berg conversion 113/002 front housing. I would like to take advantage of the bigger gears and stuff and the trans is going into a chassis car so I really don't have to use a conversion kit. Thanks

[Muffler Mike]

MSE should have a bus kit
I have seen a few at JCL race cars. I put one of these on a type 1 recently.
Basically it is just the nose cone assembly that is different.

latest and greatest JCL shifter on a type 1 box. the bus box would just have a little different shape.



And if i am not mistaken, the MSE versions leave the stock shift rails in and just hook into the area where the original hockey stick would grab.

[akabuzz]

Yes, you are not mistaken, thats how mine works.

[Abell]

That JCL shifter looks sweet!Does anyone have a link to their home page or where to buy one?

[Muffler Mike]

That JCL shifter looks sweet!Does anyone have a link to their home page or where to buy one?

Only one place you can get those. direct through JCL. (714) 895-7782

No doubt a very nice piece. makes me want to try and fit one in my car too.

[Abell]

That JCL shifter looks sweet!Does anyone have a link to their home page or where to buy one?

Only one place you can get those. direct through JCL. (714) 895-7782

No doubt a very nice piece. makes me want to try and fit one in my car too.

Thanks for the responce Mike.Is calling the only option,or do they have a internet site so I can have a better look.

[Muffler Mike]

That JCL shifter looks sweet!Does anyone have a link to their home page or where to buy one?

Only one place you can get those. direct through JCL. (714) 895-7782

No doubt a very nice piece. makes me want to try and fit one in my car too.

Thanks for the responce Mike.Is calling the only option,or do they have a internet site so I can have a better look.

calling is the only option. there is no web page up currently.

[kgturbo]

Hey Mike, Thanks for the reply. I tried contacting Jimmy Larson yesterday and Today about a chromoly roll cage for my kg vert. This shifter is for my pro mod car. I've come to the conclusion that if I were to build a full tilt 091 with a vertigate that would be the best, short of using a Medeola(which would require me to modify chassis) subsequently i've only had to modify chassis minimally to accomadate the 091. I cut top of type 1 mount and welded type 2 mount on the forward side of old mount. Axles line up perfectly. Thanks

[kgturbo]

Hey Mike, Thanks for the reply. I tried contacting Jimmy Larson yesterday and Today about a chromoly roll cage for my kg vert. This shifter is for my pro mod car. I've come to the conclusion that if I were to build a full tilt 091 with a vertigate that would be the best, short of using a Medeola(which would require me to modify chassis) subsequently i've only had to modify chassis minimally to accomadate the 091. I cut top of type 1 mount and welded type 2 mount on the forward side of old mount. Axles line up perfectly. Thanks