Blow thru IDF

Trebor · Post by **Trebor** » Tue Aug 28, 2001 8:01 pm

I looked back on the old threads about blow thru IDF's. The only thread only offered CB Performance as a source to call. Someone also stated that the mods were the same as the old Dells. What were the mods to the old dells? and how can I get some detailed info. on modifying my IDF's for blow thru. I can do machining myself but I need info on the inlet and the emulsion tubes.

Robert

magoo · Post by **magoo** » Tue Aug 28, 2001 8:11 pm

Robert,last week you said you had the turbomania book,if so check out the "mystery of the blow through" chapter Was told that the weber bodies are awful thin ,so be careful on centering the seal .....If not call me 448 1232

Trebor · Post by **Trebor** » Wed Aug 29, 2001 7:02 pm

I have talked to CB Perfomance and they do not have the blow thru IDF's ready. I was told maybe this winter. It appears that the machining of the castings is giving them problems. I would like to know if anyone has enough information regarding the process? I can machine them myself.

Robert