911 adjusters

kokanee · Post by **kokanee** » Wed Apr 18, 2001 3:09 pm

where can I get 'em?
are they worth it?
I have the big and small rockers
any special setup?

tia,
K

stevestromberg · Post by **stevestromberg** » Wed Apr 18, 2001 5:12 pm

I can supply a 3 sets out of my stash. Steve

Post by **Tom Notch** » Wed Apr 18, 2001 5:15 pm

The Berg swivel foots work very well and are a lot less money. And again just the 8mm rockers. Take about .060 or so off the bottom of the rocker so the adjusting screw will travel up into the rocker a bit farther so as to off set the added length and it will be easier to set up your geometry. Even FAT will mention this little tidbit.

------------------
Tom Notch
Tom's Old VW Home

Bleyseng · Post by **Bleyseng** » Wed Apr 18, 2001 11:06 pm

I also run the Berg swivel feet with the 1.7 rockers. Also, swap out the springs on the rocker shafts for the solid spacers off a Hydro valve rocker set up. This keeps the rockers in place with no chance of them slipping around.
Geoff

------------------
76 914 2.0L

Brandon Sinclair · Post by **Brandon Sinclair** » Thu Apr 19, 2001 9:53 am

I haven't purchased anything from Jim, but I saw on his Web page that he sells the 911 adjusters..http://www.geocities.com/motorcity/9008/parts8.html

Post by **Tom Notch** » Thu Apr 19, 2001 11:06 am

I didn't say FAT used Berg adjusters, I said they will tell you to trim the rocker if you use them. Just don't want any mis-understandings.

------------------
Tom Notch
Tom's Old VW Home