6x6 trailing arms

miller · Post by **miller** » Thu Dec 26, 2002 9:26 pm

Does anybody have info on 6x6 trailing arms. where they can be bought how much anything. thanks

prerunner1499 · Post by **prerunner1499** » Fri Dec 27, 2002 9:28 am

Mckenzies has 1 x 6, Kartex has 3 x6 , 6x6 will most likely have to be custom made. I racer friend of mine has a jig for building 6x6 tubular srms for his class 10 car.
we use 6x6 build for summers outboard cv.

miller · Post by **miller** » Fri Dec 27, 2002 2:14 pm

hey prerunner1499, do you have any info on the kartex 3x6 arms (a link possibly) or do you think i could get some more info on that jig for the arms you made. thanks for the help.

prerunner1499 · Post by **prerunner1499** » Fri Dec 27, 2002 5:25 pm

Kartek web site. www.kartek.com There is not much there but you can call and get info.
The part number for the 3x6 arms is KTK 05166
3x7 is KTK 05167
Dont know who makes, the but plan on spending over $500, they are Race Quality Chromoly.
Kevin

miller · Post by **miller** » Sat Dec 28, 2002 5:01 pm

dang 500, hey prerunner would you be able to get me the dimensions of the jig and your actual trailing arms. kinda like the guys at blind chicken racing have done. im really inteested in making my own and it would be greatly appreciated if I could get some plans. thanks

prerunner1499 · Post by **prerunner1499** » Sun Jan 05, 2003 9:05 pm

Hmm the jig is for tubular arms, not box type like what I run on race car.
the Blick Chic arms might be perfect, you could just add 3" to the arm length and they will be 6x6 (I think) email them they may be able to build them cheaper. They sell the 3x3 kit for $125, you will need 2 bearing carriers. 50-100 ea.

miller · Post by **miller** » Sun Jan 05, 2003 11:04 pm

Thanks man I was thinking about contacting them.

mlrailguy · Post by **mlrailguy** » Sat Jan 18, 2003 1:58 pm

What is the e-mail address for the blick chik arms?

Bob Ingman · Post by **Bob Ingman** » Sat Jan 18, 2003 2:07 pm

this should put you there
[email protected]
Good luck. Bob Ingman
Also you can click on the first box above the post for a profile which should include user email and web page

[This message has been edited by Bob Ingman (edited 01-18-2003).]

findog78 · Post by **findog78** » Fri Jan 31, 2003 2:37 pm

Miller- Still looking for some 3X3 trailing arms? New in box for $200. If interested email me at [email protected].
...or anyone else who wants a pair for that matter.
Mike