..
-
1967Fastback
- Posts: 283
- Joined: Thu Jun 07, 2001 12:01 am
-
njv
- Posts: 817
- Joined: Sat May 19, 2001 12:01 am
typ4 into type3 dell manifolds.
hello
hi there csp here in germany sell them and they stand at 4in tall ive got a set for my t4 into t3 i do wish they were only 3- 3 1/2 in tall as it standfs its gonna be so tight with my air filter tops right up against my engine lid still thats probably how its gonna be.
may be worth getting a cheap set of normal size manifolds and getting them cut and welded as you will get them real short then,
beszt of luck.
------------------
neil verdon 1966 t3 sqr on irs pan.
hi there csp here in germany sell them and they stand at 4in tall ive got a set for my t4 into t3 i do wish they were only 3- 3 1/2 in tall as it standfs its gonna be so tight with my air filter tops right up against my engine lid still thats probably how its gonna be.
may be worth getting a cheap set of normal size manifolds and getting them cut and welded as you will get them real short then,
beszt of luck.
------------------
neil verdon 1966 t3 sqr on irs pan.
-
1967Fastback
- Posts: 283
- Joined: Thu Jun 07, 2001 12:01 am
typ4 into type3 dell manifolds.
..
Last edited by 1967Fastback on Mon Feb 14, 2005 8:47 pm, edited 1 time in total.
-
MASSIVE TYPE IV
- Posts: 20132
- Joined: Fri Jul 07, 2000 12:01 am
typ4 into type3 dell manifolds.
Buy the CB manifolds and ship them to FAT, Greg can shorten them for you.....
I made my own jig for doing it, it takes a bit of time to get totally right..
------------------
Jake Raby
Raby's Aircooled Technology
www.aircooledtechnology.com
I made my own jig for doing it, it takes a bit of time to get totally right..
------------------
Jake Raby
Raby's Aircooled Technology
www.aircooledtechnology.com
-
1967Fastback
- Posts: 283
- Joined: Thu Jun 07, 2001 12:01 am
typ4 into type3 dell manifolds.
..
Last edited by 1967Fastback on Mon Feb 14, 2005 8:47 pm, edited 1 time in total.
-
1967Fastback
- Posts: 283
- Joined: Thu Jun 07, 2001 12:01 am
typ4 into type3 dell manifolds.
..
Last edited by 1967Fastback on Mon Feb 14, 2005 8:47 pm, edited 1 time in total.
-
Guest
typ4 into type3 dell manifolds.
I had a set done by Fat Performance and the cost was somewhere around $150. Need to buy a set of TYpe IV manifolds from CB Performance as Jake had said and then ship to Fat Performance for the rest.
I will have a full write up on this very thing soon in VWT. Thanks to Greg at Fat Performance.
I will have a full write up on this very thing soon in VWT. Thanks to Greg at Fat Performance.