Cam upgrade

Va914 · Post by **Va914** » Thu Jun 14, 2001 9:11 am

Is there any good cam upgrades to use with a stock L-Jet?

I am doing a rebuild and adding 96mm big bore and am curious about buying a new cam or just refinishing the stock one.

Thanks

Va914 · Post by **Va914** » Fri Jun 15, 2001 1:21 pm

Thanks, That's what I am looking for. I don't have any emission requirements here for a '74.

Do I need to specify degrees or will Web #73 be enough info?

Thanks again..

Evill Ed · Post by **Evill Ed** » Fri Jun 15, 2001 11:18 pm

Web-Cam #73 grind works well with D-jet, it gives a nice "bump" in the torque , similar to the stock cams powerband only stronger. The only caution with it on D-jet is that the idle emmission go up, they can be made to pass with some tweaking.

I spoke to a guy using the #73 with L-jet, he said he really liked the cam in his 1.8L and that the L-jet wasn't less affected at idle emmissions.

Hope this helps,

Ed

Evill Ed · Post by **Evill Ed** » Sat Jun 16, 2001 5:31 am

Just call Web-Cam and tell them that you want a #73 grind, that's all you gotta do. Be sure to get Web-Cam lifters also, they are made specifically for their cams.

Regards,
Ed

------------------