Slow burn project- T1 Speeduino EFI
-
Chip Birks
- Posts: 4042
- Joined: Wed Mar 12, 2008 5:59 pm
Re: Slow burn project- T1 Speeduino EFI
Some cool stuff here! I'd love to design and print some manifolds one of these days to work with some DBW tbs. Thanks for the inspiration!
-
Bruce.m
- Posts: 992
- Joined: Sun Aug 11, 2013 1:44 pm
Re: Slow burn project- T1 Speeduino EFI
The new o-ring seals have held up well & vac at idle plus idle valve position is in the right ballpark.
I do need to do some more tuning but weather hasn’t been great recently so ive not had the chance.
Collected more parts for the Type4 (upright cooling) build recently. New oil cooler, beehive springs and set of type1 tins / shroud to modify. Plan is to have 3D printed intake manifold with single throttle body.
I do need to do some more tuning but weather hasn’t been great recently so ive not had the chance.
Collected more parts for the Type4 (upright cooling) build recently. New oil cooler, beehive springs and set of type1 tins / shroud to modify. Plan is to have 3D printed intake manifold with single throttle body.