I built a trike, and the shift cable and its coupling finally gave out after a decade. I have a 1973 Automatic Type 3 Transmission where I need the means to couple the shifter cable to the lever.
The broken part is shown below.
I welcome any suggestions or recommendations on where to find this part, either just the broken shaft that includes one threaded and one fixed nut end, or an alternative custom fix.
Here is a part that I found online, but there is no way to attach the shift cable to the lever.
I have also shown the setup of where the shifter cable meets the lever.
I appreciate any help you can provide.
Need a Certain Part
-
TrikerTom
- Posts: 1
- Joined: Sun May 18, 2025 2:42 pm
Need a Certain Part
You do not have the required permissions to view the files attached to this post.
-
BugUgly
- Posts: 124
- Joined: Thu Oct 02, 2008 8:59 pm
Re: Need a Certain Part
Maybe just drill a hole through a grade 5.8 shoulder bolt and smooth the edges of the hole. Fairly sturdy, but I wouldn't want it harder than the cable end.