CNC master cylinders

Bajas, Rails and Parts
blue1957
Posts: 41
Joined: Tue Nov 17, 2020 7:28 pm

CNC master cylinders

Post by blue1957 »

I have 2 perfectly working 5/8" bore master cylinders. They work perfectly and are in great condition. $150 obo
Image
You do not have the required permissions to view the files attached to this post.
mlrailguy
Posts: 378
Joined: Sat Nov 16, 2002 12:01 am

Re: CNC master cylinders

Post by mlrailguy »

are these for brake or clutch?
User avatar
Piledriver
Moderator
Posts: 22688
Joined: Sat Feb 16, 2002 12:01 am

Re: CNC master cylinders

Post by Piledriver »

The cylinder doesn't know whats it's connected to, but as there are a pair, likely best used for brakes with a balance bar.
Addendum to Newtons first law:
zero vehicles on jackstands, square gets a fresh 090 and 1911, cabby gets a blower.
EZ3.6 Vanagon after that.(mounted, needs everything finished) then Creamsicle.
blue1957
Posts: 41
Joined: Tue Nov 17, 2020 7:28 pm

Re: CNC master cylinders

Post by blue1957 »

mlrailguy wrote: Thu Jul 13, 2023 8:51 am are these for brake or clutch?
they can be used for both. I had these on my brakes.
70 baja
Posts: 43
Joined: Wed May 28, 2008 2:21 pm

Re: CNC master cylinders

Post by 70 baja »

will these work with willwood pedal assemblies?
Post Reply