DB37 Terminal Block Ideas

[risk]

I'm upgrading my MS2 to MS3x and would really like to have a small terminal block to make adding accessories and troubleshooting easier.

Found these by googling DB37 Terminal Block:



https://www.google.com/search?q=db37+te ... afe=active

Looks like it would work out well.. What do you guys think?

I am wondering why DIYAutotune and others don't sell something similar?

[UKLuke72]

I really like that, not experienced enough to know if it'd work fine or not though

[Clonebug]

I use the relay board.....All the terminals are used and I had Mario add a fan control to a extra pinout in the upper left corner. There are four pinouts that can be utilized so technically I can add three more. The nice part of the relay board is they are labeled so I can see what goes where.
When I upgrade to MS-3 I'll have to add another terminal strip since I already have two wheel speed sensors installed that I need to connect along with a few other sensors I wouldn't mind having.

[Piledriver]

I have one of those to connect/test my ms3/ms3x or ms2/ms3x setup...with along with the jimstim.
(bought it for a daq setup)

There is actually a brother board for the jimstim for testing ms3x these days.