Slayer's 2276
- slayer61
- Posts: 124
- Joined: Wed Jul 14, 2021 10:32 am
Slayer's 2276
Rather than cluttering up my buggy project topic, I thought I'd document my engine build here.
Basic plan is this:
Fiberglass Manx clone buggy
AS21 case sent to Brothers for machine work
94mm case & clearance for stroker
full flow
drill & tap case oil galleries
weld up behind #3 cylinder
minor repair of case saver
CB 4340 82mm crank
CB 5.4" H-beam rods
Engle W125 cam
CB adjustable straight cut cam gears
Berg 1.25:1 rockers
EMPI stage II CNC wedge port heads
EMPI CNC match ported offset manifolds
44 IDF clones
Berg 1 5/8 merged exhaust w/ stinger
Enough with all that,
Brothers does very nice work, goes without saying
So with the majority of the parts sourced, I make the 2 hour trip up to Chico to LNAC for assembly
First report back from LNAC is crank assembly
Basic plan is this:
Fiberglass Manx clone buggy
AS21 case sent to Brothers for machine work
94mm case & clearance for stroker
full flow
drill & tap case oil galleries
weld up behind #3 cylinder
minor repair of case saver
CB 4340 82mm crank
CB 5.4" H-beam rods
Engle W125 cam
CB adjustable straight cut cam gears
Berg 1.25:1 rockers
EMPI stage II CNC wedge port heads
EMPI CNC match ported offset manifolds
44 IDF clones
Berg 1 5/8 merged exhaust w/ stinger
Enough with all that,
Brothers does very nice work, goes without saying
So with the majority of the parts sourced, I make the 2 hour trip up to Chico to LNAC for assembly
First report back from LNAC is crank assembly
You do not have the required permissions to view the files attached to this post.
Last edited by slayer61 on Mon Jul 18, 2022 2:31 pm, edited 1 time in total.
- slayer61
- Posts: 124
- Joined: Wed Jul 14, 2021 10:32 am
Re: Slayer's 2276
Update 7/15/22
Pieces going into the case for trial!
Pieces going into the case for trial!
- slayer61
- Posts: 124
- Joined: Wed Jul 14, 2021 10:32 am
Re: Slayer's 2276
Most recent pics from the motor shop
- slayer61
- Posts: 124
- Joined: Wed Jul 14, 2021 10:32 am
Re: Slayer's 2276
Another trip to Chico tomorrow to deliver tins, alternator & stand, fly wheel and other goodies!
I guess I need to get cracking on the pan, and plumbing & electric!
I guess I need to get cracking on the pan, and plumbing & electric!
- slayer61
- Posts: 124
- Joined: Wed Jul 14, 2021 10:32 am
Re: Slayer's 2276
More pics from motor shop. Thanks a bunch Bryan!
You do not have the required permissions to view the files attached to this post.
- slayer61
- Posts: 124
- Joined: Wed Jul 14, 2021 10:32 am
Re: Slayer's 2276
It's getting SOOoo close!
You do not have the required permissions to view the files attached to this post.
Last edited by slayer61 on Mon Jul 25, 2022 11:38 am, edited 1 time in total.
-
- Posts: 17760
- Joined: Mon Nov 13, 2006 10:17 pm
Re: Slayer's 2276
Don't forget the pinstriping and printed instructions in several languages on the engine's covers
Lee
Lee
- slayer61
- Posts: 124
- Joined: Wed Jul 14, 2021 10:32 am
Re: Slayer's 2276
Going onto the run stand for break-in!
You do not have the required permissions to view the files attached to this post.
- Clatter
- Posts: 2034
- Joined: Sun Apr 28, 2002 1:01 am
Re: Slayer's 2276
Exciting Times!
Congratulations.
Congratulations.
Speedier than a Fasting Bullet!
Beginners' how-to Type 4 build thread ---> http://shoptalkforums.com/viewtopic.php?f=1&t=145853
Beginners' how-to Type 4 build thread ---> http://shoptalkforums.com/viewtopic.php?f=1&t=145853
- OrangeCrusher
- Posts: 74
- Joined: Wed Sep 16, 2015 10:05 am
- slayer61
- Posts: 124
- Joined: Wed Jul 14, 2021 10:32 am
Re: Slayer's 2276
It's home & in the shop! I realize now that I don't have a clutch or pressure plate yet!
- slayer61
- Posts: 124
- Joined: Wed Jul 14, 2021 10:32 am
Re: Slayer's 2276
Clutch & pressure plate & other odds & ends arrived on Saturday and I have an engine in my buggy for the first time!