Mexico Fuel Injection (EFI) used basic set

[VWmexicoparts]

Basic Used Electronic Fuel Injection (EFI) set from mexican Beetles (VW Sedan 1600i 1993-2004 Digifant system) Genuine parts made by Volkswagen of Mexico!

What comes with the used fuel injection basic set?
- 1 x Throttle Body with sensors (used) -TPS and Air Intake Temp-
- 1 x Left end casting (used)
- 1 x Right end casting (used)
- 1 x Manifold DP (used)
- 1 x Gasket kit (new): intake boots (2), injector rubber rings (4) and end casting gaskets (2).

-Total price: $369 USD
Plus shipping cost by FedEx ($59 USD to the US / $79 USD to West Europe)

More extra used/new Sedan 1600i parts in stock: injectors, fuel pumps, Digifant relays, Electronic Control Units, Electronic distributors, temp sensors, wiring harness, fuel rails, alterator stands, gaskets...
NOTE:
If you need extra parts for your conversion project, just let me know your list.

Antonio Trejo
email: [email protected]

Parts VW
Mexico City
"From Volkswagen of Mexico factory..."

[H2OSB]

Antonio--

I know that EFI is made for a 1600cc engine, but how much larger can you go with engine displacement and still have that EFI keep up? I'm not looking for much, I'm just curious.

H2OSB

[VWmexicoparts]

H2OSB,
I have seen this set working on engines 1800 cc, but I am not sure if the injectors (3 PSI) are up graded

[Chip Birks]

Antonio--

I know that EFI is made for a 1600cc engine, but how much larger can you go with engine displacement and still have that EFI keep up? I'm not looking for much, I'm just curious.

H2OSB

I used Antonio's hardware on my 2054 many years ago. I used my own injectors and computer though. Drove really well, didn't want to rev much higher than 6500 even with dual springs and boost. But it drove like a stocker.

[H2OSB]

Good to know. What injectors and computer did you use?

H2OSB

[Chip Birks]

Good to know. What injectors and computer did you use?

H2OSB

I used a megasquirt 2, and Siemens 55lb/hr injectors. Ran e85.