kadrons on a 72 bay

JohnL · Post by **JohnL** » Mon Sep 09, 2002 9:06 pm

Anyone know who makes manifolds to put dual kadrons on a type four? If not,is there any reason I can't use dual 34PICT-3's on the stock '72 manifolds? TIA,John

unclejohns78 · Post by **unclejohns78** » Tue Sep 10, 2002 6:05 am

I believe CB performance makes them. I read a post in the type 4 forum a while back that mentioned this.

Pillow · Post by **Pillow** » Tue Sep 10, 2002 8:15 am

Weber ICTs fit right on T4 Solex intakes.

Then just run a T4 hex bar linkage.

The baby Dells may work as well like this.

------------------
Adrian Pillow
'66 VW Westfalia - "Biscuit"
'67 VW Deluxe Westfakia - "Dino" - FS
'79 Porsche 911 SC - "Cochese" - FS

Vgonman · Post by **Vgonman** » Thu Sep 12, 2002 4:22 am

There is a place called European Motorsport that has them and the linkage..I have a set I was going to experiment with.........EMPI is coming out with them.......they are in the new catalog, just have not finished production yet.

Pillow · Post by **Pillow** » Thu Sep 12, 2002 9:19 am

I am sure another quality EMPI part... Run from most all EMPI products!

------------------
Adrian Pillow
'66 VW Westfalia - "Biscuit"
'67 VW Deluxe Westfakia - "Dino" - FS
'79 Porsche 911 SC - "Cochese" - FS

Vgonman · Post by **Vgonman** » Wed Sep 18, 2002 7:23 pm

Not exactly true when it comes to all EMPI parts.Most are junk, but castings in bulk for intake manifolds should be pretty easy for them to hammer out. I guarantee you you got some EMPI odds and ends on any of your cars...........hard not to. So many replacement parts.......

bugboy37 · Post by **bugboy37** » Thu Sep 19, 2002 2:46 pm

try messing with any piece of cooling tin mabe by Empi..takes a grinder, tin snips, whole lotta cuss words, and a priest performing rituals to get it on...

Bob Ingman · Post by **Bob Ingman** » Thu Sep 19, 2002 7:43 pm

I`d be afraid to try to seal an EMPI manifold both top and bottom and on both sides .What are the chances everything is going to work right? Then tear everything off and go back to the store and try to get a refund. No Thanks.Good luck. Bob Ingman