Scat rocker adjusters, now 3/8" size, options?
-
mattcfish
- Posts: 41
- Joined: Thu Feb 03, 2011 2:10 pm
Scat rocker adjusters, now 3/8" size, options?
I just put some 1.25:1 Scat ratio rockers on my new 2.2L Wasserboxer. They come with the ball foot adjusters. I've heard some heated debate as to weather they should be used with Hydro lifters or not. I also considered elephant feet (more debate about lubrication), but can't find them in 3/8" size. Yes...Scat rockers now use 3/8" adjusters, not 8mm and not 9mm. I contacted Scat to confirm. What options do I have with 3/8" size? Or....should I just stick with the swivel balls?
-
Piledriver
- Moderator
- Posts: 22777
- Joined: Sat Feb 16, 2002 12:01 am
Re: Scat rocker adjusters, now 3/8" size, options?
Did you ever get any info from SCAT?
Addendum to Newtons first law:
zero vehicles on jackstands, square gets a fresh 090 and 1911, cabby gets a blower.
EZ3.6 Vanagon after that.(mounted, needs everything finished) then Creamsicle.
zero vehicles on jackstands, square gets a fresh 090 and 1911, cabby gets a blower.
EZ3.6 Vanagon after that.(mounted, needs everything finished) then Creamsicle.