Tim's Green Bug...
-
madmitch
- Posts: 934
- Joined: Tue Apr 22, 2008 8:41 pm
Re: Tim's baja projects...
I built a 4 into 1 exhaust for my dwarf car using an Extreme racing muffler. It is very light and has a very nice tone for the Suzuki GXSR 1000 engine. It may be a little more than you want to spend.www.extrememufflers.com/[img]http://i45 ... 010030.jpg[/img]
- TimS
- Posts: 5723
- Joined: Fri Apr 23, 2010 10:11 pm
Re: Tim's baja projects...
My thoughts exactly!!bajaherbie wrote:OMG
Thanks for the ideas, Mitch. I'm trying to figure out how you bent and tweaked all that pipe. Looks like yuo just take a section cut it, and weld on another section. Wouldn't be too bad, just time consuming, I guess.
Thanks for the comment.
Don’t ever yield your gift of dream; Your knack for gumption, too. For “It’s the crazy ones that have all the fun," if dreamers yearn to do.
- TimS
- Posts: 5723
- Joined: Fri Apr 23, 2010 10:11 pm
Re: Tim's baja projects...
I got a plan for the exhaust, I have enough tubing to do it, but I need one more of the right hand subaru flanges. Went to the junkyard and they didn't have one, they've been crushing cars like crazy with the price of steel nowadays. I'm going to go behind the oil pan, over to the other side, join the two right near the left header, go forward, up, then back to a muffler right next to the valve cover, similar to where the left hand glass pack is now. So it looks like I'll have to cut and turn the left hand header I have. That will wait a few weeks, I need the bug this weekend.
Also got the windshield wipers going. I recieved the 12volt armature from WW, but there seems to be a missing bushing on the inside of it. Waiting to hear from them. In the meantime, I just wired up a 50 watt bulb in series and the 6v motor works great!
AND... Let there be HEAT!!
Also got the windshield wipers going. I recieved the 12volt armature from WW, but there seems to be a missing bushing on the inside of it. Waiting to hear from them. In the meantime, I just wired up a 50 watt bulb in series and the 6v motor works great!
AND... Let there be HEAT!!
You do not have the required permissions to view the files attached to this post.
Don’t ever yield your gift of dream; Your knack for gumption, too. For “It’s the crazy ones that have all the fun," if dreamers yearn to do.
- bajaherbie
- Posts: 9967
- Joined: Sat Jul 15, 2006 7:07 pm
Re: Tim's baja projects...
winter is over... what is that heater from? looks like military issue?
Last edited by bajaherbie on Thu Apr 14, 2011 3:22 pm, edited 1 time in total.
Of all the paths you take in life, make sure a few of them are dirt.
- Qurtys Lyn
- Posts: 1558
- Joined: Mon Nov 10, 2008 2:22 pm
Re: Tim's baja projects...
It ain't over here yet. It was snowing today. And he's due north from me. 
- TimS
- Posts: 5723
- Joined: Fri Apr 23, 2010 10:11 pm
Re: Tim's baja projects...
Mostly just looking for defrost on those chilly high-desert mornings... It's from a military jeep (suposedly), it's 24 volts, but work fine on 12.bajaherbie wrote:winter is over... what is that heater from? looks like military issue?
Don’t ever yield your gift of dream; Your knack for gumption, too. For “It’s the crazy ones that have all the fun," if dreamers yearn to do.
- bajaherbie
- Posts: 9967
- Joined: Sat Jul 15, 2006 7:07 pm
Re: Tim's baja projects...
at ease, soldier!
Of all the paths you take in life, make sure a few of them are dirt.
- TimS
- Posts: 5723
- Joined: Fri Apr 23, 2010 10:11 pm
Re: Tim's baja projects...
Yes, Sir. I'm going to get the scotch as we speak.
Don’t ever yield your gift of dream; Your knack for gumption, too. For “It’s the crazy ones that have all the fun," if dreamers yearn to do.
- Lotrat
- Posts: 4975
- Joined: Sat Mar 29, 2008 11:43 pm
Re: Tim's baja projects...
Looks nice and cozy back there. I could take a nap.
-
Steve Arndt
- Posts: 7420
- Joined: Sat Mar 10, 2001 12:01 am
Re: Tim's baja projects...
Needs some shag headliner. water bed?Lotrat wrote:Looks nice and cozy back there. I could take a nap.
Sweet heater! Almost worth going liquid cooled for the ease of ducting heat.
- Leatherneck
- Moderator
- Posts: 17104
- Joined: Sat Jul 01, 2006 6:47 pm
Re: Tim's baja projects...
How loud is it. Nice addition for sure.
- TimS
- Posts: 5723
- Joined: Fri Apr 23, 2010 10:11 pm
Re: Tim's baja projects...
Not very. Certainly not as loud as the car exhaust or the fuel pump for that matter, but not any louder than a normal heater in a car.Leatherneck wrote:How loud is it. Nice addition for sure.
Hopefully the sounds of bouncing mouse poop in the heater channels will go away after a while.
Don’t ever yield your gift of dream; Your knack for gumption, too. For “It’s the crazy ones that have all the fun," if dreamers yearn to do.
- TimS
- Posts: 5723
- Joined: Fri Apr 23, 2010 10:11 pm
Re: Tim's baja projects...
I'm seriously consider something like that for noise control.Steve Arndt wrote:Needs some shag headliner.
Don’t ever yield your gift of dream; Your knack for gumption, too. For “It’s the crazy ones that have all the fun," if dreamers yearn to do.
-
Steve Arndt
- Posts: 7420
- Joined: Sat Mar 10, 2001 12:01 am
Re: Tim's baja projects...
If you get the 2.5" ORANGE dangle shag it will attenuate the 3250 RPM 500 Hz drone. I have studied this.
- TimS
- Posts: 5723
- Joined: Fri Apr 23, 2010 10:11 pm
Re: Tim's baja projects...
Do you have any data to support that?Steve Arndt wrote:If you get the 2.5" ORANGE dangle shag it will attenuate the 3250 RPM 500 Hz drone. I have studied this.
Thightened up the steering box today, put a urethane bushing on the steering shaft, streightened out my steering wheel. It's feel so much better now.
Drove it around with the back seat set in there. Seems much quieter already.
HEATER--- I'm not all that impressed with the heater. Seems like it's not blowing out super hot air. and the coolant comming out is super hot. Maybe it just takes a while to heat up the heater channels or something. It did keep me warm this morning, though. I'm still undecided.
Don’t ever yield your gift of dream; Your knack for gumption, too. For “It’s the crazy ones that have all the fun," if dreamers yearn to do.