Swirl pot breather
-
- Posts: 4719
- Joined: Thu Feb 15, 2007 9:28 pm
Re: Swirl pot breather
I didn't take it that way at all......this isn't theSamba after all where everyone gets their feeling hurt real easily....
Stripped66 wrote:The point wasn't to argue air temps with the current world record holder, but to dispel the claim that the K03 is wrapped up at 150 HP. It's not.
-
- Posts: 209
- Joined: Fri Nov 25, 2011 5:28 pm
Re: Swirl pot breather
This is true
All's good, several ways to skin the cat.
All's good, several ways to skin the cat.
-
- Posts: 405
- Joined: Mon Apr 12, 2010 6:55 pm
Re: Swirl pot breather
Be careful with the sintered bronze strainer, they plug really easy and you don't want to starve a hp pump
-
- Posts: 209
- Joined: Fri Nov 25, 2011 5:28 pm
Re: Swirl pot breather
Yeah I've rigged up some water through it, restrictive as hell!
I've found something else, a 2" 40 micron strainer, I'll weld that on instead.
I've found something else, a 2" 40 micron strainer, I'll weld that on instead.
-
- Posts: 405
- Joined: Mon Apr 12, 2010 6:55 pm
Re: Swirl pot breather
Yeah I like to find one for hydraulic systems, usually pleated stainless mesh, work a treat with low restrictions when run with fuel