I am kind of in a dilemma on my black buggy and need a couple pieces of info:
What is the distance to the top edge and the bottom of the shift rod's "L" shaped coupler of the shift rod that the shifter's ball end fits into.
Since my shift rod is in place and still sits in the front bushing in the tunnel it is not hooked up to the tranny via. the coupler. I can get a measurement but it will be close but I don't think it will be close enough for what I am trying to do.
Since the shift rod moves back and forth and twists from side to side to get into gear the ball can't be too deep or it could jam during side-to-side movement or, if not deep enough then it could fall out of the coupler.
Thanks guys and girls.
Lee