I pulled my heads of my 2.0 liter to use on a bigger engine build and put some fly cut standard bus heads back on.
Now original this engine pulled 130 HP with modified 42/36 bus heads. Type 1 pistons, H beam rods and 316 Schleicher cam.
But the Schleicher cam is a bit to big for the 39/33 bus heads, with 9.7 comp.
What do you guys have for recommendation for a cam that will pull strong with this combo.
So:
71x94 Type 1 22mm pin pistons
H-beam Rods
39/33mm valved heads a bit polished on inlet channel
Fly cut 1mm (chamber 47mm) comp ratio 9.7.
40mm twin webers
Thanks in advance
Eddie
What cam for 2.0 with small valves
- dstar5000
- Posts: 4555
- Joined: Tue Feb 12, 2002 12:01 am
Re: What cam for 2.0 with small valves
CB 2022....
DON
DON
"Let me say it as simply as I can: transparency and the rule of law will be the touchstones
of this presidency,".. Barack Obama January 21, 2009, 30 minutes before he signed the law
sealing all his personal information....
of this presidency,".. Barack Obama January 21, 2009, 30 minutes before he signed the law
sealing all his personal information....