Video store

fastvwman · **Joined:** Tue Mar 23, 2004 7:36 pm **Posts:** 178

doing some mixture tuning and trying to gert the hang of the new vertigate mse shifter. kept bouncing off the rev limit @ 7k. I would have put the 8k chip in, but I had the full size pulley on and didnt want to explode the fan.

http://videos.streetfire.net/video/test ... 209284.htm

MinamiKotaro · **Joined:** Sat Aug 06, 2005 8:26 am **Posts:** 1671

Some vids of "launch practice" with the new M&H tires.

http://www.youtube.com/watch?v=m4sWsm-1mgM

http://www.youtube.com/watch?v=KsL3d9-BnOc

And here's a shot of my gauges and some revs so Miniman can have a heart attack at my lack of vacuum. :lol:

Watch this one in high quality, it really improves the sound.

http://www.youtube.com/watch?v=8RSMKjTsboE

Wally · **Posted:** Sun Feb 01, 2009 4:33 am

fastvwman wrote:

doing some mixture tuning and trying to gert the hang of the new vertigate mse shifter. kept bouncing off the rev limit @ 7k. I would have put the 8k chip in, but I had the full size pulley on and didnt want to explode the fan.

http://videos.streetfire.net/video/test ... 209284.htm

VERY nice fastback/launches and it is indeed a long quiet desert road. Cool scenery, we don't have that overhere.
Refreshing to see a fasty in drag trim

Could you somehow explain in short what a vertigate mse shifter does?

Tnx,
Walter

Mabbo · **Joined:** Wed May 14, 2003 6:48 am **Posts:** 445

minamikotaro - hows your fuel pressure gauge hooked up?

cheers

fastvwman · **Joined:** Tue Mar 23, 2004 7:36 pm **Posts:** 178

Wally wrote:

fastvwman wrote:

doing some mixture tuning and trying to gert the hang of the new vertigate mse shifter. kept bouncing off the rev limit @ 7k. I would have put the 8k chip in, but I had the full size pulley on and didnt want to explode the fan.

http://videos.streetfire.net/video/test ... 209284.htm

VERY nice fastback/launches and it is indeed a long quiet desert road. Cool scenery, we don't have that overhere.
Refreshing to see a fasty in drag trim

Could you somehow explain in short what a vertigate mse shifter does?

Tnx,
Walter

its a forward back, forward back pattern. fancy replacement for the h pattern

MinamiKotaro · **Joined:** Sat Aug 06, 2005 8:26 am **Posts:** 1671

Mabbo wrote:

minamikotaro - hows your fuel pressure gauge hooked up?

cheers

An electric sender in the fuel rail.

Turbo_Manx_Maniac · **Joined:** Wed Oct 22, 2003 3:32 pm **Posts:** 2108

What are you using for fuel pressure management?

Your pressure is far different from mine. I get around 3 bar 43psi at idle and it increases with boost. Your doesn't seem to get above 40, that would make me worry about the injector spray pattern.

Does it launch harder if you warm the tire first and go from a higher RPM?

MinamiKotaro · **Joined:** Sat Aug 06, 2005 8:26 am **Posts:** 1671

Turbo_Manx_Maniac wrote:

What are you using for fuel pressure management?

Your pressure is far different from mine. I get around 3 bar 43psi at idle and it increases with boost. Your doesn't seem to get above 40, that would make me worry about the injector spray pattern.

Does it launch harder if you warm the tire first and go from a higher RPM?

A Bosch pressure regulator. 42psi at static is as high as it will go. It increases with boost.

In the vid with me driving, I was taking off at about 7000. :shock:

It seems to take off best at about 3000.

ToRy 70 · **Joined:** Tue Jun 08, 2004 3:00 pm **Posts:** 1144

mine does the same thing... idles with about 10 inches of vacuum, then increases to 15 to 20 when i'm taking it easy down the road. i think it's the w120 cam in my small motor. i imagine my fuel pressure responds accordingly... i just have a gauge on the rail. but i'm guessing pressure would go down when I free-rev it, and increases as i hit atmo and then boost.

what tires were you running before MK? hope you don't break something when you hook it sweet!

Humpty · **Posted:** Wed Feb 11, 2009 6:54 am

A little Aussie action for you guys....

http://www.youtube.com/watch?v=vhcCCi3UVpU

And before you ask.... No its not mine and no its not VW powered....

But it is bloody mad! :shock:

yvre · **Joined:** Sun Feb 25, 2007 12:58 pm **Posts:** 200

Humpty wrote:

A little Aussie action for you guys....

http://www.youtube.com/watch?v=vhcCCi3UVpU

And before you ask.... No its not mine and no its not VW powered....

But it is bloody mad! :shock:

Wow!!!!

panel · **Posted:** Thu Feb 12, 2009 12:54 am

Isn't that thing CRAZY :shock:

Humpty · **Posted:** Thu Feb 12, 2009 6:16 am

According to the Wallace Racing converter that's a 10.72 quarter!!! :shock:

And its a regular street bus too... See's plenty of road miles!!!!

Wally · **Posted:** Thu Feb 12, 2009 6:50 am

I heard it has a rotery Wankel (Mazda) turbo engine.

Humpty · **Posted:** Thu Feb 12, 2009 7:45 am

Wally wrote:

I heard it has a rotery Wankel (Mazda) turbo engine.

Yep.... Turbo 20B (Triple Rotor) donk.... And a G50 trans with Quaife diff and all the love....

Shoptalkforums.com

Video store

Who is online