Project "Racelook"

racelook · Post by **racelook** » Thu Jun 22, 2006 5:43 am

Hahahaha, that's right!!!

This morning picked up some stuff at the zinck-plater

Wiebrand

racelook · Post by **racelook** » Tue Jun 27, 2006 7:43 am

Yesterday, after an half day of relaxing I was sober again (is that the right word?) and I could start again with working on the car. Sanded several things, masked some things and then again it was time for spraying again. For some reason I mixed the paint too thin so I get 'lopers' all the time. Bad poop because then I have to sand again.

Today I started sanding again, degreasing, etc. and finally some painting in red and clear.

Wiebrand

racelook · Post by **racelook** » Wed Jun 28, 2006 4:37 am

So, last night and this morning started with sorting out the bits and bolts that I had zinkc-ed.

Here some pics (sorry for the size

)

Wiebrand

racelook · Post by **racelook** » Thu Jun 29, 2006 3:28 am

Last ten parts sprayed red last night. Now only 25 - 30 parts have to be sprayed black and then finally the assemblage can begin.

Wiebrand

JayInMI · Post by **JayInMI** » Thu Jun 29, 2006 4:54 am

Cool...now you can make some progress while Jonas works on other peoples cars

And that's why I watch ALOT of projects at once....hopefully someone is making progress somewhere

Jay

racelook · Post by **racelook** » Fri Jun 30, 2006 2:52 am

Hahaha.. thanks mate!!

Yesterdayevening sprayed till 0.30a.m. a part or 10-15 in black. Tomorrow antoher ten parts and all the painting of the chassis is done.

Wiebrand

jonas_linder · Post by **jonas_linder** » Fri Jun 30, 2006 5:48 am

JayInMI wrote:Cool...now you can make some progress while Jonas works on other peoples cars And that's why I watch ALOT of projects at once....hopefully someone is making progress somewhere

Jay

Hey!!!! I feel like your talking to me

JayInMI · Post by **JayInMI** » Fri Jun 30, 2006 6:44 pm

I dunno, if I had freshly painted parts I'd be *dyin'* to put it back together...of course I probably wouldn't have time.

Can't wait till you start reassembly!

Jay

racelook · Post by **racelook** » Sun Jul 02, 2006 12:49 pm

So here some pics of the red stuffl
http://www.keversite.nl/fotoalbum/fotos/34467.jpg

Today sanded some things, hang them, degreased, prepared the gun, maked the paint and spraying => BLACK

After that mounted the midmount on the gearbox.

http://www.keversite.nl/fotoalbum/fotos/34470.jpg

NICE NICE

Good mounting to the gearbox.

Probably the mid-mounts will be on sale by B-Tuning Holland soon

Wiebrand

Post by **Daniel G** » Mon Jul 03, 2006 12:06 am

I figured you would still be sorting nuts and bolts now. I don't see how you found time to work on the transaxle, too...

Keep up the good work. I can't wait to see how the entire car turns out.

Daniel

racelook · Post by **racelook** » Mon Jul 10, 2006 2:35 am

Last saturday I didn't had to work hole day, so I could work on my car again.
Here some pics.
Pieces in bubblewrap

Work place

Build-up the gearbox, mounted the gearbox, handbrake bracket, shifthandle and one front arm.

By the way, it was quite difficult to get the front arm in with the urethane stuff from Topline. Had to bend the mountings an little bit because the urethane is just to wide.

Some pieces
http://www.keversite.nl/fotoalbum/fotos/35126.jpg
http://www.keversite.nl/fotoalbum/fotos/35127.jpg
http://www.keversite.nl/fotoalbum/fotos/35128.jpg

Also started with building up the IRS-arms.

Grt Wiebrand

coxy-ben · Post by **coxy-ben** » Mon Jul 10, 2006 3:39 am

what will be the final color of the body ??

racelook · Post by **racelook** » Mon Jul 10, 2006 3:21 pm

Subaru WRX Blue

racelook · Post by **racelook** » Mon Jul 17, 2006 2:48 pm

Yesterday assambled the pedals.

Also mounted the springplates. Now have to think of something so I can lift them up to the fixing point. Is this position any good for aan low bug??

Also mounted the two outer bearings in the IRS-arms and started with building up the brakes.

Wiebrand

racelook · Post by **racelook** » Tue Jul 18, 2006 3:49 pm

Today pressed the bearings in the IRS-arms, mounted the springplates and build-up an little of the front spindles.

Wiebrand