This is from the Rennlist website: http://www.pelicanparts.com/techarticle ... mprove.htm
This kinda gives you the basics.. it doesn't really say whether it's hard or not, or what tools you need.. or how many beers.
tail shift to side shift conv.
- genrex
- Posts: 174
- Joined: Tue Jan 08, 2002 12:01 am
tail shift to side shift conv.
Oops, that's from the Pelican website..
- sinistervw
- Posts: 699
- Joined: Fri Jan 25, 2002 12:01 am
tail shift to side shift conv.
how hard is it and what is needed to convert a tail shift 914 to side shift?
- Dave_Darling
- Posts: 2534
- Joined: Thu Apr 27, 2000 12:01 am
tail shift to side shift conv.
Swap over:
The transmission.
The shift linkage--all of it, including the gear shift lever in the cockpit. (You can use your old gear shift knob if you like, but none of the rest.)
The motor mount bar.
The outer solid brackets for the late-style motor mount bar.
The inner rubber mounts, plus the brackets for those mounts.
Very doable, I've had all of those individual pieces out a number of times.
--DD
------------------
1974 VW-Porsche 914 2.0 (Type IV powered!)
Pelican Parts' 914 Tech Geek http://www.pelicanparts.com
The transmission.
The shift linkage--all of it, including the gear shift lever in the cockpit. (You can use your old gear shift knob if you like, but none of the rest.)
The motor mount bar.
The outer solid brackets for the late-style motor mount bar.
The inner rubber mounts, plus the brackets for those mounts.
Very doable, I've had all of those individual pieces out a number of times.
--DD
------------------
1974 VW-Porsche 914 2.0 (Type IV powered!)
Pelican Parts' 914 Tech Geek http://www.pelicanparts.com
-
- Posts: 216
- Joined: Mon Dec 24, 2001 12:01 am
tail shift to side shift conv.
dave you forgot to add splurging for new bushings(relatively inex.)while it's apart or aleast the correct i.d. conversion bushing at the fire wall. as for degree of difficulty, beyond pulling the engine/trans about a 3 on a scale of 1 to 10
kevin
[This message has been edited by kevin powers (edited 07-21-2002).]
kevin
[This message has been edited by kevin powers (edited 07-21-2002).]
- sinistervw
- Posts: 699
- Joined: Fri Jan 25, 2002 12:01 am
tail shift to side shift conv.
10 being the hardest?
-
- Posts: 216
- Joined: Mon Dec 24, 2001 12:01 am
tail shift to side shift conv.
you are correct sir. actually the hardest part of the whole thing might be collecting everything BEFORE you start. if you have'nt done it before, pulling the engine/trans is not that big of a deal. i think there is a tech article at pelican that makes it real easy.
[This message has been edited by kevin powers (edited 07-23-2002).]
[This message has been edited by kevin powers (edited 07-23-2002).]