CSP 914 IDF Runner Question
-
cal 67
- Posts: 297
- Joined: Wed Apr 08, 2009 5:03 pm
CSP 914 IDF Runner Question
Do the 914 CSP manifolds/runners for the IDF and DRLA have plenty of meat for porting without welding? Shooting for 220 CFM @25" with a 48mm valve. The heads are currently welded. I'm in the market for the CSP runners if they are beefy enough as-is.
-
trapnm
- Posts: 102
- Joined: Sat Oct 22, 2005 6:20 pm
Re: CSP 914 IDF Runner Question
Pile or Ray? Any opinion or first hand knowledge with this? Thanks in advance.
-
wreck
- Posts: 490
- Joined: Thu Aug 14, 2014 12:07 am
Re: CSP 914 IDF Runner Question
http://www.shoptalkforums.com/download/ ... w&id=19497
I've CB manifolds that have been welded but can't give you and flow figures yet ,still waiting for the machinist to finish the valves . no one I know has the CSP manifolds . Try contacting Jakob at Get Back On Track , he has a Facebook site.
I've CB manifolds that have been welded but can't give you and flow figures yet ,still waiting for the machinist to finish the valves . no one I know has the CSP manifolds . Try contacting Jakob at Get Back On Track , he has a Facebook site.
You do not have the required permissions to view the files attached to this post.
No matter where you go , there you are !