Turbo Buggy
-
- Posts: 85
- Joined: Fri Feb 08, 2013 11:48 am
Re: Turbo Buggy
time will tell if the turbo works or not..... I got if for free
the pipes are 36mm inside and 42.4 outside.....
Tapatalk
the pipes are 36mm inside and 42.4 outside.....
Tapatalk
- rubenski
- Posts: 2033
- Joined: Mon Jun 30, 2014 3:28 am
-
- Posts: 85
- Joined: Fri Feb 08, 2013 11:48 am
Re: Turbo Buggy
stainless steel.... but yes it's heavy but I hope it will last long and without cracks
Tapatalk
Tapatalk
-
- Posts: 85
- Joined: Fri Feb 08, 2013 11:48 am
Re: Turbo Buggy
I have tried to messure the turbine wheel trim..... it's 47mm inducer and 43mm exducer..... so its not that big
after a lot of searching I found that it's a garrett GTB2056LV
[IMG]//uploads.tapatalk-cdn.com/201705 ... 954933.jpg[/IMG]
Tapatalk
after a lot of searching I found that it's a garrett GTB2056LV
[IMG]//uploads.tapatalk-cdn.com/201705 ... 954933.jpg[/IMG]
Tapatalk
-
- Posts: 6
- Joined: Mon Jan 03, 2011 11:24 pm
Re: Turbo Buggy
Hello Mads
Interesting project, I have tried that as well. I takes quite a long time to finish all the small parts:)
You can see my old engine here: http://buggyforum.dk/viewtopic.php?f=9&t=1056&start=10
Where in Denmark are you located?
Interesting project, I have tried that as well. I takes quite a long time to finish all the small parts:)
You can see my old engine here: http://buggyforum.dk/viewtopic.php?f=9&t=1056&start=10
Where in Denmark are you located?
-
- Posts: 85
- Joined: Fri Feb 08, 2013 11:48 am
Re: Turbo Buggy
FredericiaBlobDK wrote:Hello Mads
Interesting project, I have tried that as well. I takes quite a long time to finish all the small parts:)
You can see my old engine here: http://buggyforum.dk/viewtopic.php?f=9&t=1056&start=10
Where in Denmark are you located?
Tapatalk
-
- Posts: 85
- Joined: Fri Feb 08, 2013 11:48 am
Re: Turbo Buggy
I have a old tread on the Danish site buggyforum as well
http://buggyforum.dk/viewtopic.php?f=9&t=1846
Tapatalk
http://buggyforum.dk/viewtopic.php?f=9&t=1846
Tapatalk
-
- Posts: 85
- Joined: Fri Feb 08, 2013 11:48 am
Re: Turbo Buggy
Test Fitting [IMG]//uploads.tapatalk-cdn.com/201706 ... 4949df.jpg[/IMG]
Sendt fra min SM-G935F med Tapatalk
Sendt fra min SM-G935F med Tapatalk
-
- Posts: 6
- Joined: Mon Jan 03, 2011 11:24 pm
Re: Turbo Buggy
I look forward to see it. It is more fun to see the projects that are special.
- petew
- Posts: 3920
- Joined: Sat Oct 07, 2006 4:05 pm
Re: Turbo Buggy
Are you sure you want to mount the turbo so close to the fibreglass body? Even with a turbo blanket on it?
-
- Posts: 85
- Joined: Fri Feb 08, 2013 11:48 am
Re: Turbo Buggy
Most fiberglass near the turbo is cut away and replaced by a stainless steel shield.... I'm considering to cut the fiberglass corner near the turbo downpipe[IMG]//uploads.tapatalk-cdn.com/201706 ... 046dc6.jpg[/IMG]
Sendt fra min SM-G935F med Tapatalk
[IMG]//uploads.tapatalk-cdn.com/201706 ... 922a98.jpg[/IMG]
Sendt fra min SM-G935F med Tapatalk
[IMG]//uploads.tapatalk-cdn.com/201706 ... 922a98.jpg[/IMG]
- petew
- Posts: 3920
- Joined: Sat Oct 07, 2006 4:05 pm
Re: Turbo Buggy
Ok, wow. There's a lot more space there than I thought.
With regard to covers. Aluminium will do a better job at moving the heat away from it.
With regard to covers. Aluminium will do a better job at moving the heat away from it.
-
- Posts: 85
- Joined: Fri Feb 08, 2013 11:48 am
Re: Turbo Buggy
First test run without turbo actuator, fully open vnt.... nearly no boost..... I hope it helps with the vnt closed [IMG]//uploads.tapatalk-cdn.com/201706 ... ce46ae.jpg[/IMG][IMG]//uploads.tapatalk-cdn.com/201706 ... 1401be.jpg[/IMG]
Sendt fra min SM-G935F med Tapatalk
Sendt fra min SM-G935F med Tapatalk
-
- Posts: 85
- Joined: Fri Feb 08, 2013 11:48 am
Re: Turbo Buggy
Second test run permanent closed vnt..... 1bar boost@4400rpm running pig rich lambda 0.65....
0.2bar@3000rpm
Sendt fra min SM-G935F med Tapatalk
0.2bar@3000rpm
Sendt fra min SM-G935F med Tapatalk
-
- Posts: 85
- Joined: Fri Feb 08, 2013 11:48 am
Re: Turbo Buggy
The buggy is nearly 100% up and running.... regarding turbo size it's making 0.5bar @ 2500 rpm [IMG]//uploads.tapatalk-cdn.com/201707 ... b86900.jpg[/IMG]
Sendt fra min SM-G935F med Tapatalk
Sendt fra min SM-G935F med Tapatalk