Turbo Buggy
-
- Posts: 85
- Joined: Fri Feb 08, 2013 11:48 am
Turbo Buggy
Hi I have been looking here in the forum a few years..... now its time to post my project... I have buggy on which I have built vems engine management and turbo ...
Engine spec.
1600cc.
Refurbished AS41 engine block.
Stock crankshaft.
Stock conrods.
New AA c&p 85.5mm.
W100 cam.
Stock compression ratio.
Lightly ported cylinder heads 30 degree backcut on inlet valves.
Single HD valve springs.
KEP stage2 pressure plate.
Home made injection end pieces and fuel injector manifold.
Home made center piece 2" stainless steel with modifyed Toyota 4afe throttle body.
Home made hidden turbo exhaust manifold in 1.5" stainless steel.
Home made triggerwheel 36-1 (moped rear chainwheel).
370cc bosch ev6 injectors 0280156021.
gt1544vnt turbo.
Vems v3.1 with bluetooth upgrade
Wastedspark coil directly triggered from vems box.
Engine spec.
1600cc.
Refurbished AS41 engine block.
Stock crankshaft.
Stock conrods.
New AA c&p 85.5mm.
W100 cam.
Stock compression ratio.
Lightly ported cylinder heads 30 degree backcut on inlet valves.
Single HD valve springs.
KEP stage2 pressure plate.
Home made injection end pieces and fuel injector manifold.
Home made center piece 2" stainless steel with modifyed Toyota 4afe throttle body.
Home made hidden turbo exhaust manifold in 1.5" stainless steel.
Home made triggerwheel 36-1 (moped rear chainwheel).
370cc bosch ev6 injectors 0280156021.
gt1544vnt turbo.
Vems v3.1 with bluetooth upgrade
Wastedspark coil directly triggered from vems box.
Last edited by mads b (dk) on Wed Jul 15, 2015 5:59 am, edited 1 time in total.
- turbobaja
- Posts: 2826
- Joined: Fri Sep 14, 2007 4:56 pm
- rubenski
- Posts: 2033
- Joined: Mon Jun 30, 2014 3:28 am
Re: Turbo Buggy
Looks like its plumbed for an intercooler!
Awesome.if you can weld like that.... wish i could
Awesome.if you can weld like that.... wish i could
Better to be blown than to suck!
-
- Posts: 58
- Joined: Fri May 10, 2013 7:36 pm
Re: Turbo Buggy
Nice work, but how will you keep engine cool with fan pulling radiating heat from exhaust and turbine?
-
- Posts: 85
- Joined: Fri Feb 08, 2013 11:48 am
Re: Turbo Buggy
Rubenski <- it will get a intercooler at some point right now iam worKing on a AEM water/meth injection system, pwm controled pump speed by vems
Rs58rag <- cht is not that bad 110-120C cuising at 100kmh
Rs58rag <- cht is not that bad 110-120C cuising at 100kmh
-
- Posts: 85
- Joined: Fri Feb 08, 2013 11:48 am
Re: Sv: Turbo Buggy
What could be wrong ?
Cyl 1 and 3 have this exhaust port color
https://goo.gl/photos/DjzcKbBQC2PzCGNo8
Cyl 2 and 4 have this exhaust port color
https://goo.gl/photos/DgZCm3fPNRFddeZi6
Samsung S5
Cyl 1 and 3 have this exhaust port color
https://goo.gl/photos/DjzcKbBQC2PzCGNo8
Cyl 2 and 4 have this exhaust port color
https://goo.gl/photos/DgZCm3fPNRFddeZi6
Samsung S5
Last edited by mads b (dk) on Wed Jul 15, 2015 12:40 am, edited 1 time in total.
- rubenski
- Posts: 2033
- Joined: Mon Jun 30, 2014 3:28 am
-
- Posts: 85
- Joined: Fri Feb 08, 2013 11:48 am
Re: Turbo Buggy
Problems with tapatalk it would be a lot easy to post pictures if it worked....
- petew
- Posts: 3920
- Joined: Sat Oct 07, 2006 4:05 pm
Re: Turbo Buggy
I'm very interested as to how you chose your turbo. My engine is pretty similar to yours.
-
- Posts: 85
- Joined: Fri Feb 08, 2013 11:48 am
Re: Turbo Buggy
petew wrote:I'm very interested as to how you chose your turbo. My engine is pretty similar to yours.
It was free
-
- Posts: 85
- Joined: Fri Feb 08, 2013 11:48 am
Re: Turbo Buggy
Pictures in post 6 should be working now
-
- Posts: 85
- Joined: Fri Feb 08, 2013 11:48 am
Re: Turbo Buggy
could it be fuel injectede at the wrong time/ wrong cylinder vs injection driver ?
You do not have the required permissions to view the files attached to this post.
- petew
- Posts: 3920
- Joined: Sat Oct 07, 2006 4:05 pm
Re: Turbo Buggy
mads b (dk) wrote:petew wrote:I'm very interested as to how you chose your turbo. My engine is pretty similar to yours.
It was free
HAHAHA! Great reason to use it!
-
- Posts: 85
- Joined: Fri Feb 08, 2013 11:48 am
Re: Sv: Turbo Buggy
New inlet manifold project
Samsung S5
Samsung S5
You do not have the required permissions to view the files attached to this post.
-
- Posts: 85
- Joined: Fri Feb 08, 2013 11:48 am
Re: Sv: Turbo Buggy
Slow progress
Samsung S5
Samsung S5
You do not have the required permissions to view the files attached to this post.