how to check r/p and 4th gear if good condition or not?

Discuss VW transaxles and transmissions. Gearheads wanted!
pupjoint
Posts: 103
Joined: Wed May 23, 2007 6:13 pm

how to check r/p and 4th gear if good condition or not?

Post by pupjoint »

managed to dig a 4.125 RP and 0.89 002 fine gear at an old vw shop. he has things laid everywhere.

Image
Image
Image
Image
Image
Image
Image
Image

not sure if the line means some damage or something
Image
Image
Image
Bruce2
Posts: 7087
Joined: Sat Oct 13, 2001 1:01 am

Re: how to check r/p and 4th gear if good condition or not?

Post by Bruce2 »

That "line" is a groove that VW machined into the gear for ID purposes.
Clean away the gunk, is it a G833, K833, or an O833?
User avatar
fastvwman
Posts: 222
Joined: Tue Mar 23, 2004 4:36 pm

Re: how to check r/p and 4th gear if good condition or not?

Post by fastvwman »

check for any obvious damage then have it magged for cracks.
pupjoint
Posts: 103
Joined: Wed May 23, 2007 6:13 pm

Re: how to check r/p and 4th gear if good condition or not?

Post by pupjoint »

Bruce2 wrote:That "line" is a groove that VW machined into the gear for ID purposes.
Clean away the gunk, is it a G833, K833, or an O833?
it is a G833. wish it is a K.

he has quite a few tranny parts everywhere, but always taped together in matched pairs i supposed.

he seems knowledgeable about tranny parts and told me has has found 4 sets of swing ZF LSD but sold all. told him to find one for me :lol:

will go back and look for the following

1. course 002 3rd and course 0.89 002 and fine 0.89 002
2. K 4.125
3. whatever good used bearings
Bruce2
Posts: 7087
Joined: Sat Oct 13, 2001 1:01 am

Re: how to check r/p and 4th gear if good condition or not?

Post by Bruce2 »

pupjoint wrote:
Bruce2 wrote:That "line" is a groove that VW machined into the gear for ID purposes.
Clean away the gunk, is it a G833, K833, or an O833?
it is a G833. wish it is a K.
Best is the O type. Pretty rare though.
Logsplitter16
Posts: 3
Joined: Tue Apr 10, 2018 7:47 am

Re: how to check r/p and 4th gear if good condition or not?

Post by Logsplitter16 »

Found a coveted O833 ring and pinion teeth are bigger on both the ring gear and pinion than the g831 I have in my shop pm me for details
Logsplitter16
Posts: 3
Joined: Tue Apr 10, 2018 7:47 am

Re: how to check r/p and 4th gear if good condition or not?

Post by Logsplitter16 »

Here are some pics
You do not have the required permissions to view the files attached to this post.
Post Reply