SwayBar for 5 inch narrowed ball joint beam

Vuitton356T · Post by **Vuitton356T** » Tue Jul 05, 2005 9:42 pm

I have a 5 inch narrowed beam, ball joint 67. I want a sway bar, any ideas.

Vuitton356T · Post by **Vuitton356T** » Thu Jul 07, 2005 12:10 am

sideshow · Post by **sideshow** » Thu Jul 07, 2005 12:26 am

I see a listing for a 4" bar, but it might be worth asking if a custom could be made. Or shocks moved inboard slightly.
http://aircooled.net/new-bin/viewproduc ... d2=SSS0002

JohnConnolly · Post by **JohnConnolly** » Thu Jul 07, 2005 1:55 pm

I would think a 4" bar would work on a 5" beam if you just work a little bit, it's only 1/2" per side.

John
Aircooled.Net Inc.

Vuitton356T · Post by **Vuitton356T** » Thu Jul 07, 2005 5:49 pm

You got a part number, is it a bolt on setup or weld in
Thanks

JohnConnolly · Post by **JohnConnolly** » Fri Jul 08, 2005 11:00 am

it's bolt in, and the link is a couple posts up.

John
Aircooled.Net Inc.

mulkfam3 · Post by **mulkfam3** » Mon Sep 05, 2005 11:14 am

John is there anyway to adapt that to a type 2 link pin set-up? Or do you have one for the type 2's? My beams been narrowed 4.5 so that width should work.

Thanks

volkdent · Post by **volkdent** » Sun Sep 18, 2005 11:58 am

Vuitton356T, I just saw your ride in VolksWorld. Very nice!

Jason

JohnConnolly · Post by **JohnConnolly** » Tue Sep 20, 2005 4:58 pm

we can make narrowed bars for anything, please e-mail me with details. They are special order, and can take 12 weeks or so.

John
Aircooled.Net Inc.

vw1303 · Post by **vw1303** » Tue Oct 18, 2005 11:58 pm

check out airspeedparts.com they are out of canada and they make sway bars for narrowed suspension.