Project "Racelook"
-
- Posts: 402
- Joined: Sun Jun 29, 2003 1:28 pm
Yesterday, after an half day of relaxing I was sober again (is that the right word?) and I could start again with working on the car. Sanded several things, masked some things and then again it was time for spraying again. For some reason I mixed the paint too thin so I get 'lopers' all the time. Bad poop because then I have to sand again.
Today I started sanding again, degreasing, etc. and finally some painting in red and clear.
Wiebrand
Today I started sanding again, degreasing, etc. and finally some painting in red and clear.
Wiebrand
- jonas_linder
- Posts: 1587
- Joined: Sun Sep 08, 2002 12:01 am
-
- Posts: 402
- Joined: Sun Jun 29, 2003 1:28 pm
So here some pics of the red stuffl
http://www.keversite.nl/fotoalbum/fotos/34467.jpg
Today sanded some things, hang them, degreased, prepared the gun, maked the paint and spraying => BLACK
After that mounted the midmount on the gearbox.
http://www.keversite.nl/fotoalbum/fotos/34470.jpg
NICE NICE
Good mounting to the gearbox.
Probably the mid-mounts will be on sale by B-Tuning Holland soon
Wiebrand
http://www.keversite.nl/fotoalbum/fotos/34467.jpg
Today sanded some things, hang them, degreased, prepared the gun, maked the paint and spraying => BLACK
After that mounted the midmount on the gearbox.
http://www.keversite.nl/fotoalbum/fotos/34470.jpg
NICE NICE
Good mounting to the gearbox.
Probably the mid-mounts will be on sale by B-Tuning Holland soon
Wiebrand
-
- Posts: 402
- Joined: Sun Jun 29, 2003 1:28 pm
Last saturday I didn't had to work hole day, so I could work on my car again.
Here some pics.
Pieces in bubblewrap
Work place
Build-up the gearbox, mounted the gearbox, handbrake bracket, shifthandle and one front arm.
By the way, it was quite difficult to get the front arm in with the urethane stuff from Topline. Had to bend the mountings an little bit because the urethane is just to wide.
Some pieces
http://www.keversite.nl/fotoalbum/fotos/35126.jpg
http://www.keversite.nl/fotoalbum/fotos/35127.jpg
http://www.keversite.nl/fotoalbum/fotos/35128.jpg
Also started with building up the IRS-arms.
Grt Wiebrand
Here some pics.
Pieces in bubblewrap
Work place
Build-up the gearbox, mounted the gearbox, handbrake bracket, shifthandle and one front arm.
By the way, it was quite difficult to get the front arm in with the urethane stuff from Topline. Had to bend the mountings an little bit because the urethane is just to wide.
Some pieces
http://www.keversite.nl/fotoalbum/fotos/35126.jpg
http://www.keversite.nl/fotoalbum/fotos/35127.jpg
http://www.keversite.nl/fotoalbum/fotos/35128.jpg
Also started with building up the IRS-arms.
Grt Wiebrand
-
- Posts: 402
- Joined: Sun Jun 29, 2003 1:28 pm